Sway Bars
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: Sway Bars
I haven't cut one apart to find out, but I think it's solid.
Bill Harper
inov8r@windstream.net
inov8r@windstream.net
-
- Posts: 2303
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Sway Bars
After our autocross last Sunday with only a rear BMR bar, set to the lowest setting (closest to the end of the bar), and a factory 2012 front bar, I can confirm that the car is quite stable with this configuration. Go for it!xcidmigs wrote:what do you think of the concept of replacing the rear bar only? Since you describe the difficulty of front install plus seem to have noticed big change on rear bar install?
Now to get a better front bar on the car!!
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
-
- Posts: 2303
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Sway Bars
My front BMR bar just hit the garage door. Now I have the suspension parts all in order, I just need some jack stand time.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?