Side Front Fender Center Molding
Side Front Fender Center Molding
I've been searching for Side Front Fender Center Molding (92246917 / 92246916) but not having much luck. Looks like I missed a set on ebay back in December. I was trying to see if they crossed over from any other vehicles, would anyone know if there are any options? Thanks in advance!
- Attachments
-
- molding trim piece needed
- 1.png (68.14 KiB) Viewed 5887 times
Re: Side Front Fender Center Molding
Nut,
These are only on the Caprice PPV, 2011 to 2017. You should be able to find them. Maybe make a request in the WTB section of this forum?
Maurice
These are only on the Caprice PPV, 2011 to 2017. You should be able to find them. Maybe make a request in the WTB section of this forum?
Maurice
Maurice Sheil
[email protected]
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
[email protected]
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
- Mooseman
- Administration Staff
- Posts: 1308
- Joined: Mon Jun 12, 2017 11:35 pm
- Location: Ottawa, ON Canada
- Contact:
Re: Side Front Fender Center Molding
There is also a FB group for Caprice parts. Give that a shot.
https://www.facebook.com/groups/capriceppvcarsandparts
Alternatively, there's also car-part.com. Although they don't catalogue that particular part, search for a yard with a fender for a Caprice and see if they'll sell you just the moulding.
Another more expensive option is a set of repeater lights instead on the fake vents. Found one set on eBay:
https://ebay.us/m/dQ2aFX
We have some threads here regarding the wiring.
https://www.facebook.com/groups/capriceppvcarsandparts
Alternatively, there's also car-part.com. Although they don't catalogue that particular part, search for a yard with a fender for a Caprice and see if they'll sell you just the moulding.
Another more expensive option is a set of repeater lights instead on the fake vents. Found one set on eBay:
https://ebay.us/m/dQ2aFX
We have some threads here regarding the wiring.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: Side Front Fender Center Molding
I purchased some very similar for my PPV because I couldn’t get the factory ones.Mooseman wrote: ↑Tue Feb 17, 2026 7:33 pm There is also a FB group for Caprice parts. Give that a shot.
https://www.facebook.com/groups/capriceppvcarsandparts
Alternatively, there's also car-part.com. Although they don't catalogue that particular part, search for a yard with a fender for a Caprice and see if they'll sell you just the moulding.
Another more expensive option is a set of repeater lights instead on the fake vents. Found one set on eBay:
https://ebay.us/m/dQ2aFX
We have some threads here regarding the wiring.
2011 Chevy Caprice PPV
Who is online
Users browsing this forum: No registered users and 1 guest