Boost gauge enabled in my cluster help
Boost gauge enabled in my cluster help
Hello all. I installed an LSA on my 2015 Chevy Caprice with the l77 that I rebuilt. I had a friend enable the boost gauge in the cluster but I do not get it to read on the cluster. On my aeroforce I can read how much boost I'm making so I know the computer can read it. My question is is how do I get the cluster to recognize the boost? Anybody have any suggestions or help. Thanks in advance.
Re: Boost gauge enabled in my cluster help
Jester,
I see that you are in Nebraska. What part? I'm south of Omaha.
Maurice
I see that you are in Nebraska. What part? I'm south of Omaha.
Maurice
Maurice Sheil
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Re: Boost gauge enabled in my cluster help
Western Nebraska. If you played Oregon trail and didn't die of dysentery before you crossed the Platte River, you went through Bridgeport virtually before it was a thing.
Re: Boost gauge enabled in my cluster help
Did you enable the one that displays below oil temp and pressure in the 2014+ caprice cluster? If so, I'm interested to know if that one does or does not work with aftermarket boosted cars. From what I've seen online, I think the only cars that might have had the boost gauge from factory is the diesel Chevy Cruze. The zl1 would be the only other possible candidate (because it shares a similar gauge cluster architecture), but instead it has a boost gauge in the 4 pack gauge in the console.
Who is online
Users browsing this forum: No registered users and 0 guests