WTB: 6.0 A6 Engine/Trans Wire Harness (2012)

[Schul274]

I would like to buy a replacement wire harness for my 2012 caprice PPV (6.0). I believe I have a wire pinch/rub through in mine.

If anyone is parting out a car or has an extra, please let me know.

[Tansman]

I saw 66 auto salvage in Oklahoma has some they are parting .

[PPV6.0]

Did you find a harness yet? If not I may have one from a 2013. How much did you want to spend $$?

[Capeasy]

Is a 2013 and 2014 different?
And is the under hood fuse box the same?
Thanks

[s/c'd cav]

13 TO 14 are different , even the part #s for the 11-13 are different

11 part # 92253242
12 part # 92261877
13 part # 92268935

all of which are discontinued

[Capeasy]

Thanks, I ended up repairing mine. I guess it's common for these harnesses to deteriorate from heat from long periods of idling, at least mine was at the O2 connectors on the back of the engine.

[s/c'd cav]

Thanks, I ended up repairing mine. I guess it's common for these harnesses to deteriorate from heat from long periods of idling, at least mine was at the O2 connectors on the back of the engine.

starter and crank sensor wiring will also need some care at somepoint , so keep that in your mind if you have the starter out , or exhaust manifold/header , as that frees up alot of space to repair them

[Andy91954]

I need an engine harness for my 2012 ppv can anyone help?
I have looked and looked but can’t find one

[Capeasy]

I went thru the same issue, I called a few wiring harness manufacturers for motor swap projects and got quotes almost double what a typical LS swap harness would cost and would have to wait up to 3 months for it. So it was easier to just buy good quality connectors and all the other supplies to make my own, which was probably better quality and heat shielded than OEM.

[Andy91954]

Yeah I know, I bought 2 wiring harnesses already and going to fix them up very well. Wish me luck