See Chris White at www.whiteautoandmedia.com for programming services.
Payment: Zelle (most banks offer) to PPVSteve@Gmail.com
Face Book Messenger Pay (Meta Pay)
I do not take paypal any longer.
Include your shipping address in the notes.
Items usually ship the next day, tracking will be provided for all items.
WM Caprice PPV - 2011-2013
USB - I no longer offer this cord. For a simple USB cord that will work see ebay :
https://www.ebay.com/itm/203443689990
( If link broken seach ebay for : USB Cable For Peugeot 207 307 308 407 Citroen C2 C3 C4 for Radio RD43 RD45 )
3.5mm Aux In - Do to weak demand I no longer offer this cord.
20 Pin Video Input Connector - This connector will give you a standard female RCA connector for the rear camera video input and the DVD video input. NOTE: If you are adding a factory rear camera set up to a WM PPV this connector will be included with the camera harness. If you are adding an aftermarket backup camera then this connector will plug right into the standard RCA patch cord that usually comes with the aftermarket units.
COST: $59.00 Shipped
Factory Rear View Camera Harness - Attention!! to use this harness kit you need the GM Lid harness that GM no longer sells.
If you can find one in a wrecking yard then this harness will work for you. -
This harness is used when you are installing the Factory GM rear view camera from the 2015+ PPV. You will buy the Camera and the Trunk Harness from GM (UPDATE : Trunk or Lid Harness is no longer availible from GM). This harness will continue on to the IQ radio and plug into the side with an included 20 pin video input connector.. It will get it's power from the AUX battery relay and turn on signal via a splice into the reverse light circuit in the trunk on the passenger side of the vehicle. (see below for similar picture)
COST: $139.00 Shipped
WN Caprice PPV - 2014 +
USB CORD - I no longer offer this item. Can use any standard USB cord.
If using with a GM receptacle get one side that is a USB "Mini B" connector.
3.5mm Aux in cord - Cord to be used with a GM 3.5mm Aux in receptacle.
2015+ Mylinks need programming for the AUX in to work.
COST: $45.00 Shipped
Factory Rear View Camera Harness - Attention!! to use this harness kit you need the GM Lid harness that GM no longer sells.
If you can find one in a wrecking yard then this harness will work for you.
- This harness is used when you are installing the Factory GM rear view camera from the 2015+ PPV. You will buy the Camera and the Trunk Harness from GM. This harness will continue on to the MyLink radio and you will need to insert 2 terminals into one of the radio plugs on the back of the unit. It will get it's power from the AUX battery relay and turn on signal via a splice into the reverse light circuit in the trunk on the passenger side of the vehicle. If you have removed your AUX battery tray and electronics I have an option for hat as well, let me know.
COST: $118.00 Shipped
After Market Camera Input Lead - Use this lead if you are installing an after market camera that uses a standard male RCA to send the camera signal. I can also send you a pigtail with the correct connectors to hook into the AUX battery circuit (at the isolator) if you would like to get the camera power from there. If you have removed your AUX battery tray and electronics I have an option for hat as well.
COST: $35
- IMG_1462.JPG (149.49 KiB) Viewed 17544 times
Other - Non Audio related Parts and Plugs
Repeater Harness - This is a set of connectors for the Australian and Chinese LED fender repeaters with about 9 foot of cord to attach to the headlight harness. Comes with standard connectors and adhesive shrink tubing for the 4 splices that need to be made.
COST: $39
- IMG_1418.JPG (85.42 KiB) Viewed 17544 times
UPDATE: Mouser now carries these, slightly different part number but same item.
Mouser listing:
https://www.mouser.com/ProductDetail/Ra ... Zhrg%3D%3D
- antenna.jpg (130.98 KiB) Viewed 17544 times
COST: $55
SS Shifter Conversion Harness and related items - If you are eliminating the PPV column shifter and going with an SS center console these parts will help. YO\ou will need to tune your transmission to activate the tap up tap down feature. And there is a network wire called "Line Data" that is inactive in the PPV BCM. I believe all it does it light up what gear you are in at the shifter. While I include a wire for it it is inactive in the PPV BCM so BCM programming will be needed. At this time I am not sure Chris White has created that specifically for us.
When doing an SS Dash many guys have opted to do the HUD (Heads Up Display) at the same time so the harness I made piggybacks on the shifter harness to get power. Only needed if you are doing the HUD. And you can always add it later if you want.
If you do add the HUD the Sport and Traction Control buttons will have to be moved from next to the headlight switch to make room for the HUD dimmer controls. So I have a simple Pigtail that will allow you to wire up the sport and traction buttons to the SS consoles traction button and use one of the parking buttons as a sport mode switch.
SS Shifter Conversion Harness - Cost $126.00
SS HUD Harness - Cost $78.00
SS Button Sport and Traction Pigtail - $45.00
Payment: Zelle (most banks offer) to PPVSteve@Gmail.com
Facebook Messenger Pay (Meta Pay)
I do not take Paypal any longer.
Include your shipping address in the notes.
Items usually ship the next day, tracking will be provided for all items.
Link to instructions will be provided and I will walk you through the install if needed.
