WN 2014+ Outside Mirror Connector Information

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

WN 2014+ Outside Mirror Connector Information

Post by smwalker »

A member sent me some Buick Park Avenue mirrors to try and decipher the wiring pinout and connector information. Will start by listing the connector information for the WM and SS. Then get into the differences of the Buick ones.

SS Pinout and connector diagram:
SS Mirror Plug pic.png
SS Mirror Plug pic.png (152.43 KiB) Viewed 748 times
SSmirror pinout 1.png
SSmirror pinout 1.png (135.98 KiB) Viewed 748 times
SS mirror pinout 2.png
SS mirror pinout 2.png (122.21 KiB) Viewed 748 times
PPV Pinout and connector diagram:
PPV14 mirror plug pic.png
PPV14 mirror plug pic.png (153.23 KiB) Viewed 748 times
14PPV Mirror pinout.png
14PPV Mirror pinout.png (121.24 KiB) Viewed 748 times

As you can see the PPV uses many fewer wires but still has the same connector. I have determined there are about 4 extra wires on the SS mirror that are used for determining the position of it so the memory function can work properly. The PPV has none of those wires, just the minimum wires to move it.


Connector Information

Part numbers on the Pinout for the connector seem to be accurate (for a change).
These are the Yazaki YES 0.64 unsealed connector series - CATALOG PAGE
The Male is 7282-7696-40
The Female is 7283-7696-40
The Female with CPA (7283-7697-40) CPA stands for Connector Position Assurance. It is a (secondary) lock used on the housing lock (i.e. primary lock) that holds a male connector and a female connector (or a connector and an electrical device) together and guarantees complete mating. Not really need in this application but if you can only find the connectors with it on there they are OK to use.

Mirror Connector Picture.png
Mirror Connector Picture.png (101.78 KiB) Viewed 748 times

Terminal Information



The one with Au are gold plated, not really needed. For our wires the 18-20 AWG ones would work good.
So good choices would be :

MALE 7114-4721-02

FEMALE 7116-4721-02

Mirror Terminals.png
Mirror Terminals.png (149.6 KiB) Viewed 748 times

Connector / Terminals Availability
Connectors
Nexus - Male Minimum 25
Nexus - Female No Stock

Terminals
Nexus Electronics - Male Minimum 200
Nexus Electronics - Female Minimum 200

You can sometimes find pretty good copies of the connectors and terminals on Aliexpress or Alibaba in smaller quantities. Just search by the OEM part numbers.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Buick Park Avenue Mirror Connectors

Post by smwalker »

Buick Park Avenue Mirror Connectors

The Buick Park Avenue Mirrirs came in 2 forms that we know of so far. Guess we could classify them as a Base Mirror and the HIgh End Mirror.

Base has: Adjustable Mirror - No memory Function, Integrated Turn Signal in cover

High End has: Adjustable Mirror with memory Function, Integrated Turn Signal in cover, Heated, Power Folding

Here is a picture of the High End connector compared to the SS/WN PPV mirror connector:
White - Park Avenue
Gray SS/PPV
IMG_20221216_113652.jpg
IMG_20221216_113652.jpg (422.94 KiB) Viewed 742 times
IMG_20221216_113819.jpg
IMG_20221216_113819.jpg (514.95 KiB) Viewed 742 times
IMG_20221216_113757.jpg
IMG_20221216_113757.jpg (617.6 KiB) Viewed 742 times
IMG_20221216_113741.jpg
IMG_20221216_113741.jpg (350.75 KiB) Viewed 742 times
IMG_20221216_113712.jpg
IMG_20221216_113712.jpg (281.03 KiB) Viewed 742 times
As you can see the Park Avenue connector is 14 cavity to the SS/PPV 12 cavity

This is the pinout for the Park Avenue Mirrors the best I can gather from testing:
PA MirrorPinout.png
PA MirrorPinout.png (195.48 KiB) Viewed 529 times
Connector Information

These also look to be Yazaki but this time the 1.0III(040III) series unsealed connector

Female Housing 14 cavity - 7283-5832 CATALOG PAGE
Male Housing 14 cavity - 7282-5832 CATALOG PAGE

Terminal Information
Terminals Female:
7116-4231-02 - CATALOG PAGE

Terminals Male:
7114-4231-02 - CATALOG PAGE

Connector and Terminal Availability

No Availability from my common vendors. Some terminals available in Gold plating


Base Mirror Information

Here is info on the Base mirror connector:
Also seems to be the 1.0III(040III) series from Yazaki- would use the same terminals as above
Female Connector - 7283-5830 Catalog Page
Male Connector - 7282-5830 Catalog Page
IMG_20221228_110522.jpg
IMG_20221228_110522.jpg (628.88 KiB) Viewed 736 times
IMG_20221228_110516.jpg
IMG_20221228_110516.jpg (500.47 KiB) Viewed 736 times
IMG_20221228_110535.jpg
IMG_20221228_110535.jpg (532.74 KiB) Viewed 736 times
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Post Reply