door speaker adapter?

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
leonpiper69
Posts: 42
Joined: Sun Jun 27, 2021 5:27 pm
Location: North of Philadelphia

door speaker adapter?

Post by leonpiper69 »

2011 PPV

Crutchfield was no help as was the same with metras site.

Does anyone know what metra speaker adapter fits our cars? Saw a youtube video and was hoping the info would be there but sadly the guy just used to screws to hold it to the orig adapter for the stock speakers.

Just don't want to buy 5 or 6 different ones to find the right one.

Thanks
DapperDanMan
Posts: 47
Joined: Fri Sep 18, 2020 6:41 pm
Location: Georgetown, TX

Re: door speaker adapter?

Post by DapperDanMan »

Metra doesn't seem to make them. I also just screwed the aftermarket speakers to the factory spacers and it worked fine.
You will need to get ahold of these most likely if you want aftermarket.
Front:
https://aerpro.com/aps290f#
Rear:
https://aerpro.com/aps290r#
2015 Caprice 6.0
BluesBro
Posts: 134
Joined: Tue Aug 03, 2021 1:26 am

Re: door speaker adapter?

Post by BluesBro »

The is the adapter I used for the front doors on my 2014. Used a combo of high density foam on the back and low density foam on the front to seal it.
https://www.scosche.com/installation/20 ... er-adapter
2014 Caprice PPV 6.0L - TSP Stage 1 Cam, Solo 3in Mach Cat Back, VCM OTR, Pedders Coilovers, HP Tuned
2002 Avalanche 5.3L - MBRP Exhaust, RC 6in Lift
DapperDanMan
Posts: 47
Joined: Fri Sep 18, 2020 6:41 pm
Location: Georgetown, TX

Re: door speaker adapter?

Post by DapperDanMan »

BluesBro wrote: Thu Oct 14, 2021 9:23 am The is the adapter I used for the front doors on my 2014. Used a combo of high density foam on the back and low density foam on the front to seal it.
https://www.scosche.com/installation/20 ... er-adapter
Exactly what I needed! Will be ordering these, thanks!
His ‘11 has a different design to the speaker mounting plate though.
2015 Caprice 6.0
BluesBro
Posts: 134
Joined: Tue Aug 03, 2021 1:26 am

Re: door speaker adapter?

Post by BluesBro »

DapperDanMan wrote: Fri Oct 15, 2021 8:26 am
BluesBro wrote: Thu Oct 14, 2021 9:23 am The is the adapter I used for the front doors on my 2014. Used a combo of high density foam on the back and low density foam on the front to seal it.
https://www.scosche.com/installation/20 ... er-adapter
Exactly what I needed! Will be ordering these, thanks!
His ‘11 has a different design to the speaker mounting plate though.
Good to know, I have not taken the door panels off the 2013 yet so I had not seen the differences.
2014 Caprice PPV 6.0L - TSP Stage 1 Cam, Solo 3in Mach Cat Back, VCM OTR, Pedders Coilovers, HP Tuned
2002 Avalanche 5.3L - MBRP Exhaust, RC 6in Lift
DapperDanMan
Posts: 47
Joined: Fri Sep 18, 2020 6:41 pm
Location: Georgetown, TX

Re: door speaker adapter?

Post by DapperDanMan »

BluesBro wrote: Fri Oct 15, 2021 9:24 am Good to know, I have not taken the door panels off the 2013 yet so I had not seen the differences.
‘13 has a pretty generic 6.5 inch speaker with three screws holding it into the factory plastic mounting plate, so you can just reuse that mounting plate if you want.
2015 Caprice 6.0
Post Reply