X505 Driver Door Trim Harness Connector information

[smwalker]

Just wanted to park some information on connector X505 Driver Door Harness to Driver Door Trim Harness. Had a member adding SS door panels and needed some terminals for the seat memory function.

Pinout Diagram.

Screenshot 2020-02-02 at 4.38.23 PM.png (169.08 KiB) Viewed 2196 times

So how that reads is there are two sizes of terminals inside the connector:
Smaller Terminals - MCON Series (later found out 1.2MM size) Also found out it is the LL type for "Locking Lance"
Larger Terminals - 2.8 MCP series (stands for 2.8mm size)

Catalog:
TE MCON Catalog (Page 4 for MCON LL part numbers)

The only Female socket terminal Mouser has in singles is the .5-.75 wire size which is good for smaller wires
Mouser - TE 7-1452656-1
MCON LL Female