Looking for 2014+ shifter wiring diagram

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Looking for 2014+ shifter wiring diagram

Post by smwalker »

I still need to hook up the bulb for the gear indicator on the shifter to the lights.
In the Caprice that circuit is called LED backlight control. On a 2014 I would imagine the closest place you could tap into it would be the back of the HVAC controls. Looks to be a white and yellow wire at the HVAC panel plug spot 9 :

Image
Image

Is there a storage bin in the Camaro COnsole?? It have a light in it?
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Ilikemtb999
Posts: 220
Joined: Wed Feb 06, 2019 11:49 pm

Re: Looking for 2014+ shifter wiring diagram

Post by Ilikemtb999 »

Looks like I never snapped a picture of the entire thing. I’ll do that in the morning. It does have a storage bin and two cup holders. No light but it’s got a 12v plug outlet and a usb which I need to buy an extension for. Still unsure on the parking brake, the camaro one is ugly and on the passenger side which seems odd. I think I could trim the stock plate for the foot pedal and fit it under there.

Also thank you for finding that. Wiring the accessories up will be next.
67613EAB-5DE2-4A1E-8FF3-A1F89B4CE900.jpeg
67613EAB-5DE2-4A1E-8FF3-A1F89B4CE900.jpeg (121.67 KiB) Viewed 12675 times
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: Looking for 2014+ shifter wiring diagram

Post by lastcall190 »

FWIW the 04+ GTO had the ebrake on the passenger side as well. Was weird at first but you use it only a handful of times per trip and forget about it. IMO I would just do that, especially if it matches the console. Nice install so far thanks for the pics.

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Ilikemtb999
Posts: 220
Joined: Wed Feb 06, 2019 11:49 pm

Re: Looking for 2014+ shifter wiring diagram

Post by Ilikemtb999 »

It sure looks like it would just bolt in and hook up to the e brake cable. It looks like such an afterthought but maybe I’d get over it. (Too bad there isn’t enough room for the aux gauges in front of the shifter)

Image
lastcall190
Posts: 604
Joined: Mon Sep 11, 2017 5:17 am
Location: North Jersey

Re: Looking for 2014+ shifter wiring diagram

Post by lastcall190 »

Funny, before I even read your comment I looked at the pic and thought... "GAUGES..."

I agree the Camaro e-brake does kind of look like an afterthought. Damn, at least they could have maybe used a pleather boot or something :lol:

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...
Ilikemtb999
Posts: 220
Joined: Wed Feb 06, 2019 11:49 pm

Re: Looking for 2014+ shifter wiring diagram

Post by Ilikemtb999 »

If only there was enough room in the cubby area but they’d be buried in the dash.


I’ll have to decide on the E brake. The foot one is fine but I removed the plate to fit the console. I’m sure it could be trimmed down and still function but then that leaves the console a bit unfinished looking.
Lscaprice
Posts: 1
Joined: Tue Feb 07, 2023 9:56 pm

Re: Looking for 2014+ shifter wiring diagram

Post by Lscaprice »

Need help with mine I have the ss paddle shifter and also trying to throw on the ss floor shifter what shifting cable did u guys use ?
Also when I wire the the steering wheel what pin does it go connected to in the bcm? Do I also have to runs pin to the tcm or ecm ?
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Looking for 2014+ shifter wiring diagram

Post by smwalker »

Lscaprice wrote: Tue Feb 07, 2023 10:26 pm Need help with mine I have the ss paddle shifter and also trying to throw on the ss floor shifter

Also when I wire the the steering wheel what pin does it go connected to in the bcm?
Do I also have to runs pin to the tcm or ecm ?
You can combine the wires from the shifter and the paddles into one spot on the BCM. Only thing you will need to do is have an ON/OFF switch somewhere on the wire going to the paddles.

No, no wires to the TCM or ECM. Only BCM

Then just have to turn on the TU/TD in the TCM using HP Tuners or similar.

See this post for Diagrams and pinouts: viewtopic.php?f=21&t=4321#p31923
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Capeasy
Posts: 173
Joined: Wed Aug 07, 2019 9:16 pm
Location: Downey, CA.

Re: Looking for 2014+ shifter wiring diagram

Post by Capeasy »

Is the wiring diagram different for a 2013 Steve?
Walt (AKA:Capeasy) So. Cal.
2013 Caprice 9C1,Huron white, Blackbear tune, DOD Delete, Texas Speed stage 2 cam with all the goodies, Circle D 258 mm converter, 3200 stall. Spectra CAI, 3.45 Diff, deep trans pan. BlackWidow Venom exhaust,Granatelli oval cutouts, Doug Thorley tri-Y headers, Pedders coilovers,Tower brace, Widend OE. rear wheels to 10" wide with 295 Nitto's
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: Looking for 2014+ shifter wiring diagram

Post by smwalker »

Capeasy wrote: Fri Nov 24, 2023 3:44 pm Is the wiring diagram different for a 2013 Steve?
Yea everything different from WM to WN.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Post Reply