How To: Adding an amplifier
Re: How To: Adding an amplifier
have you had any luck finding anything like this for the 14-17's ?
Re: How To: Adding an amplifier
Nope do not think it is in the WN's. Gonna have to cut and splice like the ol days.
Re: How To: Adding an amplifier
yeah i kinda figured , oh well , was worth asking just in case you had found something
-
- Posts: 47
- Joined: Fri Sep 18, 2020 6:41 pm
- Location: Georgetown, TX
Re: How To: Adding an amplifier
This is probably a silly question, but what type of tool should I use to crimp those terminals for the blue connector to the wire? My wire crimping tool doesn’t do well with smaller crimps.
2015 Caprice 6.0
Re: How To: Adding an amplifier
Will need whats commonly called a non insulated barrel crimper.
They make two styles ratcheting and non ratcheting. I think the non ratcheting are a bit easier for the novice as you have more control and can back off if things are going badly
Search amazon or ebay for:
IWISS Non Insulated Open Barrel Terminal Crimp Tool - Wire Crimper for Molex, Delphi, AMP/Tyco, Harley, PC/Computer, Automotive 24-14 AWG
https://www.amazon.com/IWISS-Harness-Cr ... 429&sr=8-6
With these you have to do 2 crimps per terminal. One for the wire crimp and one for the Insulation crimp. Whereas with the ratcheting type ones you usually do both in one shot.
something like:
https://www.amazon.com/IWISS-Profession ... 93&sr=8-20
They make two styles ratcheting and non ratcheting. I think the non ratcheting are a bit easier for the novice as you have more control and can back off if things are going badly
Search amazon or ebay for:
IWISS Non Insulated Open Barrel Terminal Crimp Tool - Wire Crimper for Molex, Delphi, AMP/Tyco, Harley, PC/Computer, Automotive 24-14 AWG
https://www.amazon.com/IWISS-Harness-Cr ... 429&sr=8-6
With these you have to do 2 crimps per terminal. One for the wire crimp and one for the Insulation crimp. Whereas with the ratcheting type ones you usually do both in one shot.
something like:
https://www.amazon.com/IWISS-Profession ... 93&sr=8-20
-
- Posts: 9
- Joined: Tue May 21, 2019 7:31 am
- Location: Wisconsin
Re: How To: Adding an amplifier
To Steve Walker
Thank you so much for your time to make this post. I have a 2013 and want to upgrade the factory radio and amp. I see you selected infinity speakers. it's the only brand I buy myself. I am sincerely interested in buying and all of your cable assemblies for the sub as well.
the whole post is incredible to read and very relieving.
may I contact you directly about the cables?
thank you
Rick
Thank you so much for your time to make this post. I have a 2013 and want to upgrade the factory radio and amp. I see you selected infinity speakers. it's the only brand I buy myself. I am sincerely interested in buying and all of your cable assemblies for the sub as well.
the whole post is incredible to read and very relieving.
may I contact you directly about the cables?
thank you
Rick
Re: How To: Adding an amplifier
Drummerdaddy,
I have a spare WX7 male/female harness with about 2' of pigtail on both sides. Might make your install a little more plug and play. And you could easily remove it if needed. PM me.
Maurice
I have a spare WX7 male/female harness with about 2' of pigtail on both sides. Might make your install a little more plug and play. And you could easily remove it if needed. PM me.
Maurice
Maurice Sheil
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
mhsheil@gmail.com
2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Re: How To: Adding an amplifier
Yea take Maurice up on his cable. I no longer make them as the wire got tooo expensive.
but if you are mounting an amp in the glove box and you think the harness that comes with it is long enough you can send that to me and I can put the connectors right on the end of the amps harness.
but if you are mounting an amp in the glove box and you think the harness that comes with it is long enough you can send that to me and I can put the connectors right on the end of the amps harness.
-
- Posts: 42
- Joined: Sun Jun 27, 2021 5:27 pm
- Location: North of Philadelphia
Re: How To: Adding an amplifier
Dang I was going to order a cable from you. Going to go DSP and all amps in the trunk. Just would saved me a few minutes but I can cut and splice them I guess.smwalker wrote: ↑Sat Apr 10, 2021 11:43 pm Yea take Maurice up on his cable. I no longer make them as the wire got tooo expensive.
but if you are mounting an amp in the glove box and you think the harness that comes with it is long enough you can send that to me and I can put the connectors right on the end of the amps harness.
Re: How To: Adding an amplifier
Last time I checked the project list on mouser some of the parts were on back order. If you come up short on anything let me know I will check my stock.