Factory Remote Start

Electronic systems, stereo and Holden iQ, wiring, it all goes here....
Post Reply
User avatar
Fudgehog
Posts: 278
Joined: Sat Aug 19, 2017 2:08 am
Location: Wisconsin

Re: Foctory Remote Start

Post by Fudgehog »

Yeah, not achievable without WAMS, there's no option for remote start BCM programming through TIS. It's definitely a proprietary patch done by WAMS.

Easiest is TIS and VXdiag, but yes it could in theory be done by dealer too. But probably for an arm and a leg.
13 Caprice 6.0L, Solo catback exhaust, 3.27 diff, VCM OTR and Volant throttle spacer, MSD coils plugs wires, transmission pan upgrade and widemouth filter. Camaro 18" rims.

Active Duty USAF
Top
xcidmigs
Posts: 783
Joined: Fri Feb 13, 2015 8:12 pm
Location: SE PA

Re: Factory Remote Start

Post by xcidmigs »

I did make it work also same process as above $40 ACdelco vin license and tool, I actually asked at the dealer I use if I got the WAMS part done would they be able to do it and they had zero clue said anything remote start gets farmed out and told me big $$$, So i bought the stuff myself and worked through it via laptop an frustration. YRMV
Top
Post Reply

Return to “Stereo / Electronics / Electrical”