Front Bumper Cover: Install Tip

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
HoldOn SV

Front Bumper Cover: Install Tip

Post by HoldOn SV »

I found this method helpful when installing the front bumper cover (solo):
Once in place, install one of the (4) plastic rivets to keep the cover from falling off. Loosen the inner fender liners more by removing the T-20 torx screws attached to the lower deflector (2 each side). Slightly seat the nuts in the cover and start the bolts (see picture). Slide the cover into the slots in the fender. Hold the cover in place while tightening the screws you already started.
https://drive.google.com/file/d/1yh39pj ... sp=sharing
Post Reply