Help, trying remove passenger airbag and glovebox

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
73TA
Posts: 11
Joined: Wed Aug 12, 2020 10:16 pm

Help, trying remove passenger airbag and glovebox

Post by 73TA » Mon Sep 13, 2021 7:08 pm

I am struggling to remove the passenger airbag and glovebox. I got the 10mm bolts and screws out of the bottom of the knee/bolster airbag. I can't seem to figure out the rest. The drivers side knee/bolster airbag was easy.

This is turning into quite the pain.


Thanks
Mike

BluesBro
Posts: 46
Joined: Tue Aug 03, 2021 6:26 am

Re: Help, trying remove passenger airbag and glovebox

Post by BluesBro » Mon Sep 13, 2021 8:23 pm

https://www.newcaprice.com/forum/viewto ... 7&start=60

Look down to the illustrations in the post by smwalker, really helped me out the other week.

Oh and the rubber bottom part of the glove box just pulls out, revealing some screws.
2014 Caprice PPV 6.0L - TSP Stage 1 Cam, Solo 3in Mach Cat Back, HP Tuned
2002 Avalanche 5.3L - MBRP Exhaust, RC 6in Lift

DapperDanMan
Posts: 32
Joined: Fri Sep 18, 2020 11:41 pm
Location: Liberty Hill, TX

Re: Help, trying remove passenger airbag and glovebox

Post by DapperDanMan » Tue Sep 14, 2021 4:25 am

On an ‘11-‘13 there are 3 screws along the front under the rubber pad on the bottom of the glove box, 3 screws behind the silver trim piece on the dash just about the glove box, and 2 behind the little pop out covers on the left and right sides.
2015 Caprice 6.0
2019 Ram 2500 CTD
2016 Ford Explorer Sport

73TA
Posts: 11
Joined: Wed Aug 12, 2020 10:16 pm

Re: Help, trying remove passenger airbag and glovebox

Post by 73TA » Tue Sep 14, 2021 5:08 pm

Thanks guys, can't believe I did not catch that. Got it out.

Thanks
Mike

Post Reply