Sound Deadener / Deadening / Sound Proofing Thread
Posted: Mon May 23, 2016 1:04 am
Changed the title on this thread to be a more general discussion of sound deadening topics for the Caprice
Just wanted to share with you guys I sent some measurements over to Sound Deadener Showdown and he put together a package for our Caprices. NOT CHEAP!! but I plan to give it a shot later this year with a complete detailing of the install of course.
If anyone want to go first please do!
____________START__________________
Here's what I expect you to need -
Front Doors (each):
4.5 CLD Tiles™, outer skin
2 CLD Tiles™, probably cut into smaller pieces, inner skin
1 CLD Tile™, probably cut into smaller pieces, trim panel
Extruded Butyl Rope
5.6 ft² MLV
7.5 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides
Rear Doors (each):
4 CLD Tiles™, outer skin
1.5 CLD Tiles™, probably cut into smaller pieces, inner skin
1 CLD Tile™, probably cut into smaller pieces, trim panel
Extruded Butyl Rope
6.1 ft² MLV
7.5 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides
Kick Panels (each):
.5 CLD Tiles™
1 ft² MLV
1 ft² 1/8" CCF
1 Velcro Strips, adhesive 2 sides
Floor:
12 CLD Tiles™
39.5 ft² MLV
54 ft² 1/8" CCF (extra is to double up in the foot wells)
4 Velcro Strips, adhesive 2 sides
Back Seat Platform / Riser:
4 CLD Tiles™
11.7 ft² MLV
11.7 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides
Roof:
12 CLD Tiles™
21 ft² 3/4" Hydrophobic Melamine Foam
Rear Deck:
5 CLD Tiles™
8.7 ft² 1/8" CCF
C-Pillars (each):
1.5 CLD Tiles™
2.4 ft² 3/4" Hydrophobic Melamine Foam
* Be very careful if there are airbags in the C-Pillars. The safest
course in that case is to do nothing.
Trunk Floor / Spare Tire Well:
6 CLD Tiles™, horizontal surfaces
5 CLD Tiles™, sides of spare well
26.4 ft² MLV
26.4 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides
Trunk Lid:
6 CLD Tiles™
Quarter Panels (each):
4.5 CLD Tiles™
8.2 ft² MLV
8.2 ft² 1/8" CCF
3.5 Velcro Strips, adhesive 2 sides
Trunk Back Wall:
1 CLD Tiles™
1.7 ft² MLV
1.7 ft² 1/8" CCF
2 Velcro Strips, adhesive 2 sides
Totals:
91 CLD Tiles™
1 roll Extruded Butyl Rope
121.1 ft² MLV
150.9 ft² 1/8" CCF
25.8 ft² 3/4" Hydrophobic Melamine Foam
32 Velcro Strips, adhesive 2 sides
1 32 oz can HH-66 Vinyl Contact Cement
* I really like filling the voids in the rear quarter panels with 1.5"
Hydrophobic Melamine Foam but it's very hard to calculate how much you'd
need without looking in the space. I haven't included any for that space.
As an Order:
91 CLD Tiles™ @ 2.25 = $204.75
1 roll Extruded Butyl Rope @ 9.75 = 9.75
30 linear ft MLV @ 9.78 = 293.40
12 sheets 1/8" CCF @ 15.55 = 186.60
7 pieces ft² 3/4" Hydrophobic Melamine Foam @ 19.00 = 133.00
32 Velcro Strips, adhesive 2 sides @ 1.47 = 47.04
1 32 oz can HH-66 Vinyl Contact Cement @ 16.50 = 16.50
Sub Total: $891.04
Shipping for MLV: 105.58
Shipping for Balance: 118.79
Total: $1115.41
Payment Options:
------------------------------------------------------------------
Visa, MC or Discover by phone: (410) 458-6418
* Please e-mail shipping and billing addresses before calling.
------------------------------------------------------------------
PayPal: don@sounddeadenershowdown.com (PayPal invoice on request)
* A PayPal invoice will allow you to use a credit or debit card, with or
without a PayPal account.
* If you are interested in 6 months financing through PayPal, request a
PayPal Invoice and it will take you through the process.
* Please do not send PayPal payments as a gift.
------------------------------------------------------------------
Check or money order
------------------------------------------------------------------
------------------------------------------------------------------
*** If you use PayPal, please be sure that the shipping address provided
by PayPal is correct or that you have confirmed a different shipping
address with us before you place your order. We will not be responsible
for rerouting your order or the costs involved. Thank you ***
------------------------------------------------------------------
------------------------------------------------------------------
Thank you.
On 5/17/2016 5:33 PM, Steve Walker wrote:
Measurements for:
USA Market - 2011-2017 Caprice PPV
AUS Market - 2007-2017 Statesman WM,WN 2007-2017 Caprice WM,WN
On the US models designed for police use they came very stripped down with no
sound dampening to speak of. Floor options were either vinyl or carpet both
with jute felt underlayment. Sunroofs were not an available option in the US,
Spare tire wells are a plastic insert into the trunk floor.
1) Height and width of front door exterior sheet metal. - 27x43
(all measurements in inches)
2) Height and width of front door interior trim panel. - 23x35
3) Height and width of rear door exterior sheet metal. - 28x42
4) Height and width of rear door interior trim panel. - 25x35
5) Height and width of the kick panel/front foot well outer sides. - 13x11
6) Width of the floor (include the sides and top of the center tunnel and the
height of each outer sill). - 72
7) Distance from as far up the firewall as you can reach to the front edge of
the front seats. - 36
8) Distance from the front edge of the front seats to the front of the base of
the platform for the back seat.- 43
9) Height and width of the vertical riser running from the floor to the platform
the back seat sits on. - 9
10) Length and width of the back seat platform. - 22x54
11) Length and width of the roof. - 58x52
12) Length and width of the sun roof (if any). - Not an option in USA
13) length and width of the rear deck. - 24x52
14) Height and width of the C-Pillars - 14x24
15) Length and width of the trunk floor. - 48x48
16) Depth and diameter (depth, length and width, if not circular) of spare tire
well. - 12x30x33
17) Length and width of the trunk lid. - 33x44
18) Height and width of the rear quarter panels (measured from inside the
trunk). - 24x43
19) Depth and width of trunk back wall (above the bumper). - 5x48
_______________END__________________
Just wanted to share with you guys I sent some measurements over to Sound Deadener Showdown and he put together a package for our Caprices. NOT CHEAP!! but I plan to give it a shot later this year with a complete detailing of the install of course.
If anyone want to go first please do!
____________START__________________
Here's what I expect you to need -
Front Doors (each):
4.5 CLD Tiles™, outer skin
2 CLD Tiles™, probably cut into smaller pieces, inner skin
1 CLD Tile™, probably cut into smaller pieces, trim panel
Extruded Butyl Rope
5.6 ft² MLV
7.5 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides
Rear Doors (each):
4 CLD Tiles™, outer skin
1.5 CLD Tiles™, probably cut into smaller pieces, inner skin
1 CLD Tile™, probably cut into smaller pieces, trim panel
Extruded Butyl Rope
6.1 ft² MLV
7.5 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides
Kick Panels (each):
.5 CLD Tiles™
1 ft² MLV
1 ft² 1/8" CCF
1 Velcro Strips, adhesive 2 sides
Floor:
12 CLD Tiles™
39.5 ft² MLV
54 ft² 1/8" CCF (extra is to double up in the foot wells)
4 Velcro Strips, adhesive 2 sides
Back Seat Platform / Riser:
4 CLD Tiles™
11.7 ft² MLV
11.7 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides
Roof:
12 CLD Tiles™
21 ft² 3/4" Hydrophobic Melamine Foam
Rear Deck:
5 CLD Tiles™
8.7 ft² 1/8" CCF
C-Pillars (each):
1.5 CLD Tiles™
2.4 ft² 3/4" Hydrophobic Melamine Foam
* Be very careful if there are airbags in the C-Pillars. The safest
course in that case is to do nothing.
Trunk Floor / Spare Tire Well:
6 CLD Tiles™, horizontal surfaces
5 CLD Tiles™, sides of spare well
26.4 ft² MLV
26.4 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides
Trunk Lid:
6 CLD Tiles™
Quarter Panels (each):
4.5 CLD Tiles™
8.2 ft² MLV
8.2 ft² 1/8" CCF
3.5 Velcro Strips, adhesive 2 sides
Trunk Back Wall:
1 CLD Tiles™
1.7 ft² MLV
1.7 ft² 1/8" CCF
2 Velcro Strips, adhesive 2 sides
Totals:
91 CLD Tiles™
1 roll Extruded Butyl Rope
121.1 ft² MLV
150.9 ft² 1/8" CCF
25.8 ft² 3/4" Hydrophobic Melamine Foam
32 Velcro Strips, adhesive 2 sides
1 32 oz can HH-66 Vinyl Contact Cement
* I really like filling the voids in the rear quarter panels with 1.5"
Hydrophobic Melamine Foam but it's very hard to calculate how much you'd
need without looking in the space. I haven't included any for that space.
As an Order:
91 CLD Tiles™ @ 2.25 = $204.75
1 roll Extruded Butyl Rope @ 9.75 = 9.75
30 linear ft MLV @ 9.78 = 293.40
12 sheets 1/8" CCF @ 15.55 = 186.60
7 pieces ft² 3/4" Hydrophobic Melamine Foam @ 19.00 = 133.00
32 Velcro Strips, adhesive 2 sides @ 1.47 = 47.04
1 32 oz can HH-66 Vinyl Contact Cement @ 16.50 = 16.50
Sub Total: $891.04
Shipping for MLV: 105.58
Shipping for Balance: 118.79
Total: $1115.41
Payment Options:
------------------------------------------------------------------
Visa, MC or Discover by phone: (410) 458-6418
* Please e-mail shipping and billing addresses before calling.
------------------------------------------------------------------
PayPal: don@sounddeadenershowdown.com (PayPal invoice on request)
* A PayPal invoice will allow you to use a credit or debit card, with or
without a PayPal account.
* If you are interested in 6 months financing through PayPal, request a
PayPal Invoice and it will take you through the process.
* Please do not send PayPal payments as a gift.
------------------------------------------------------------------
Check or money order
------------------------------------------------------------------
------------------------------------------------------------------
*** If you use PayPal, please be sure that the shipping address provided
by PayPal is correct or that you have confirmed a different shipping
address with us before you place your order. We will not be responsible
for rerouting your order or the costs involved. Thank you ***
------------------------------------------------------------------
------------------------------------------------------------------
Thank you.
On 5/17/2016 5:33 PM, Steve Walker wrote:
Measurements for:
USA Market - 2011-2017 Caprice PPV
AUS Market - 2007-2017 Statesman WM,WN 2007-2017 Caprice WM,WN
On the US models designed for police use they came very stripped down with no
sound dampening to speak of. Floor options were either vinyl or carpet both
with jute felt underlayment. Sunroofs were not an available option in the US,
Spare tire wells are a plastic insert into the trunk floor.
1) Height and width of front door exterior sheet metal. - 27x43
(all measurements in inches)
2) Height and width of front door interior trim panel. - 23x35
3) Height and width of rear door exterior sheet metal. - 28x42
4) Height and width of rear door interior trim panel. - 25x35
5) Height and width of the kick panel/front foot well outer sides. - 13x11
6) Width of the floor (include the sides and top of the center tunnel and the
height of each outer sill). - 72
7) Distance from as far up the firewall as you can reach to the front edge of
the front seats. - 36
8) Distance from the front edge of the front seats to the front of the base of
the platform for the back seat.- 43
9) Height and width of the vertical riser running from the floor to the platform
the back seat sits on. - 9
10) Length and width of the back seat platform. - 22x54
11) Length and width of the roof. - 58x52
12) Length and width of the sun roof (if any). - Not an option in USA
13) length and width of the rear deck. - 24x52
14) Height and width of the C-Pillars - 14x24
15) Length and width of the trunk floor. - 48x48
16) Depth and diameter (depth, length and width, if not circular) of spare tire
well. - 12x30x33
17) Length and width of the trunk lid. - 33x44
18) Height and width of the rear quarter panels (measured from inside the
trunk). - 24x43
19) Depth and width of trunk back wall (above the bumper). - 5x48
_______________END__________________