Page 1 of 1

At my wits end with ABS issue!

Posted: Mon Apr 22, 2019 6:47 pm
by johnpz2721
I have replaced everything bearings sensors harnesses light is still on what is next to replace still have codes c0045 and now have c0050
Should I replace the abs module next ??
Also is a 2014 module compatible with a 2012
Thanks for all the help

Re: At my wits end with ABS issue!

Posted: Tue Apr 23, 2019 10:59 am
by s/c'd cav
have you checked the wiring from the sensor all the way to the module ?

and no 12 and 14 are way different , the 14 module is a 1 year only part # , and shared with the 14 SS sedan

11-13 are a front and rear system , and the 14-17's are a cross system , 1 front and 1 rear are on the same master cylinder circuit

Re: At my wits end with ABS issue!

Posted: Tue Apr 23, 2019 2:42 pm
by johnpz2721
Where do I begin to check does anyone know where I can find a diagram?

Re: At my wits end with ABS issue!

Posted: Tue Apr 23, 2019 2:50 pm
by s/c'd cav
ask steve , user id is smwalker

he is pretty good with getting diagrams

Re: At my wits end with ABS issue!

Posted: Wed Apr 24, 2019 9:45 am
by smwalker

Re: At my wits end with ABS issue!

Posted: Wed Apr 24, 2019 11:05 am
by s/c'd cav
great info !

thank you steve !!

Re: At my wits end with ABS issue!

Posted: Wed Apr 24, 2019 11:38 am
by johnpz2721
Thank yo so much Steve

Re: At my wits end with ABS issue!

Posted: Sun Jul 25, 2021 10:38 am
by #802PalmBeach
Going through the same exact thing what did it end up being??

Re: At my wits end with ABS issue!

Posted: Thu Sep 16, 2021 8:51 pm
by Cdd0789
Has anyone figured this out? I'm having the same problem. I've replaced both rear wheel speed sensors and 1 hub bearing (that I don't think was bad). The problem started out as abs light on intermittently but now is constant. I suspect its a wiring problem but I haven't traced the wires from the back to the abs module. I was hoping someone had repaired this already and could tell me where the problem in the wiring most likely is.