6L80 Replacement w/ JBMX Heavy Duty Torque Converter
- tedwards0633
- Posts: 80
- Joined: Thu May 25, 2017 1:48 am
- Location: Milwaukee
6L80 Replacement w/ JBMX Heavy Duty Torque Converter
So I am biting the bullet and replacing my 6L80 transmission on my 2012 PPV. I was getting a P0777 code and didn’t want to piece together the transmission to find the problem. I was able to get a deal on a JBMX rebuilt torque converter that I be upgrading as well. I will have a breakdown of the job and video soon, should be done by the start of the new decade!
- Attachments
-
- D6C20C7C-9682-4EC6-9364-1FBEF171A6A6.jpeg (2.54 MiB) Viewed 5228 times
-
- 10E7BB3E-A844-4C43-93C4-A51EC3ABC48D.jpeg (3.21 MiB) Viewed 5228 times
Re: 6L80 Replacement w/ JBMX Heavy Duty Torque Converter
Will you be going to a higher stall ?
And have you done a DOD delete yet?
I to will be swapping out the converter at the same time as the Cam swap.
Thanks
And have you done a DOD delete yet?
I to will be swapping out the converter at the same time as the Cam swap.
Thanks
Walt (AKA:Capeasy) So. Cal.
2013 Caprice 9C1,Huron white, Blackbear tune, DOD Delete, Texas Speed stage 2 cam with all the goodies, Circle D 258 mm converter, 3200 stall. Spectra CAI, 3.45 Diff, deep trans pan. BlackWidow Venom exhaust,Granatelli oval cutouts, Doug Thorley tri-Y headers, Pedders coilovers,Tower brace, Widend OE. rear wheels to 10" wide with 295 Nitto's
2013 Caprice 9C1,Huron white, Blackbear tune, DOD Delete, Texas Speed stage 2 cam with all the goodies, Circle D 258 mm converter, 3200 stall. Spectra CAI, 3.45 Diff, deep trans pan. BlackWidow Venom exhaust,Granatelli oval cutouts, Doug Thorley tri-Y headers, Pedders coilovers,Tower brace, Widend OE. rear wheels to 10" wide with 295 Nitto's
- tedwards0633
- Posts: 80
- Joined: Thu May 25, 2017 1:48 am
- Location: Milwaukee
Re: 6L80 Replacement w/ JBMX Heavy Duty Torque Converter
OEM stall, but I got a CAM job a while back.
- tedwards0633
- Posts: 80
- Joined: Thu May 25, 2017 1:48 am
- Location: Milwaukee