In the middle of my DOD removal and cant seem to free up the oil pan. been Under the car numerous times to check to see if I left a bolt in place .Seems that I have them all out .Is it possible that it could be stuck ? anyone else had an issue like this ?
Thanks
6.0 oil pan removal
Re: 6.0 oil pan removal
There's usually some RTV in the corners of the pan, so it's not unusual to have to free them up. Be careful if you pry on anything. It's all aluminum and easily scored.
Joe
Joe
-
bluethunder
- Posts: 165
- Joined: Tue Jan 10, 2017 6:43 pm
Re: 6.0 oil pan removal
Thanks for the information,,,,,will check that
-
bluethunder
- Posts: 165
- Joined: Tue Jan 10, 2017 6:43 pm
Re: 6.0 oil pan removal
I got it !!! What a pain
-
CrashTestDummy
- Posts: 2265
- Joined: Sat Feb 07, 2015 8:31 pm
- Location: Pearland, Texas
Re: 6.0 oil pan removal
Heh, I'll bet that project started with a "I'll just pop the oil an off right quick!"
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?