90psi Oil pressure??

Tech discussions on the L77 6.0L V8.
markf1971
Posts: 19
Joined: Fri Jul 22, 2022 9:55 pm
Location: Alabama

Re: 90psi Oil pressure??

Post by markf1971 »

s/c'd cav wrote: Fri Jan 06, 2023 10:08 am thats the DOD connector
Can you disconnect this connector that was identified (top picture in #4 post) and the DOD be 'disabled'? As in, like the same manner as disconnecting the connector to the sensor on the power brake booster (thanks Mooseman!), or using a Range device on the OBD2 port?

If so, do you know what if any codes will be thrown?

Thanks!
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: 90psi Oil pressure??

Post by s/c'd cav »

markf1971 wrote: Sun Feb 19, 2023 5:38 pm
s/c'd cav wrote: Fri Jan 06, 2023 10:08 am thats the DOD connector
Can you disconnect this connector that was identified (top picture in #4 post) and the DOD be 'disabled'? As in, like the same manner as disconnecting the connector to the sensor on the power brake booster (thanks Mooseman!), or using a Range device on the OBD2 port?

If so, do you know what if any codes will be thrown?

Thanks!
not if you want the engine to run correctly , the DOD system is alot more involved than just the VLM !

disconeccting the vac sensor in the booster creats a CEL code , and the computer knows to not turn the DOD on , which is why others will use it , plus its easy to get to
Post Reply