Page 1 of 1
LS7 MAF ?
Posted: Fri Jul 16, 2021 10:02 pm
by #802PalmBeach
Few questions,
Will it work with my VCM OTR ?? very important
Does it even make a difference? Worth it?
I am aware that minor fabrication and tuning be required, and I'm fine with that. Just need to know if this should be on my future wish list at all.
https://g8only.com/product/granatelli-m ... using-kit/
Re: LS7 MAF ?
Posted: Sat Jul 17, 2021 8:16 pm
by s/c'd cav
you need a adapter tube to use the ls3/7 maf , also it will need to be tuned
Re: LS7 MAF ?
Posted: Wed Jul 21, 2021 12:24 pm
by #802PalmBeach
s/c'd cav wrote: ↑Sat Jul 17, 2021 8:16 pm
you need a adapter tube to use the ls3/7 maf , also it will need to be tuned
that part I understand and is a non issue. more wondering if it's worth it and what are the gains ( AFTER TUNE)
Re: LS7 MAF ?
Posted: Mon Jul 26, 2021 11:00 am
by bstoner
Are you maxing out the MAF? If not then there is no reason to go larger. If you are maxing out the airflow then you will need to upgrade to the larger MAF (or rescale); otherwise there is no point. It is not a performance enhancement for more HP but rather to make sure the engine can properly measure the airflow.
Re: LS7 MAF ?
Posted: Mon Jul 26, 2021 12:43 pm
by #802PalmBeach
Valid point I just thought the improved flow across a bigger one would result in performance gains even without maxing it out (?)