Turbo
Re: Turbo
Not sure if the owner of the car is a member of this forum, but HunterTuned on YouTube had a couple videos dialing in a single turbo Caprice. https://www.youtube.com/channel/UCanabQ ... ry=caprice
-
- Posts: 48
- Joined: Sun Aug 20, 2017 7:06 pm
Re: Turbo
There is also a thread over on LS1 Tech in the forced induction forum of a PPV being built.
2011 PPV 9C3
-
- Posts: 2302
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Turbo
Over in the Member Builds section, first or second thread:
http://www.newcaprice.com/forum/viewtop ... =36&t=3205
http://www.newcaprice.com/forum/viewtop ... =36&t=3205
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
-
- Posts: 109
- Joined: Mon Jan 23, 2017 2:11 pm
- Location: South side chicago il
Re: Turbo
I'll be finishing mine up in the next couple weeks just working the bugs out now. I bought the kit from cartuning.ca it is ment for a g8 so there was a little bit of modification needed but not much and I documented everything and sent the kit builder pictures
Re: Turbo
That kit looks high quality. I’m just looking to get some design ideas layout etc. Does the crossover run under the trans or around the front ?undrcvrppv wrote: ↑Sun Mar 29, 2020 9:56 am I'll be finishing mine up in the next couple weeks just working the bugs out now. I bought the kit from cartuning.ca it is ment for a g8 so there was a little bit of modification needed but not much and I documented everything and sent the kit builder pictures
-
- Posts: 109
- Joined: Mon Jan 23, 2017 2:11 pm
- Location: South side chicago il
Re: Turbo
Under the trans definitely a higher priced kit but well worth it for the quality of parts and fab work
-
- Posts: 148
- Joined: Wed Nov 04, 2020 7:09 pm
Re: Turbo
have you done a write up thread on your build?undrcvrppv wrote: ↑Tue Mar 31, 2020 12:15 pm Under the trans definitely a higher priced kit but well worth it for the quality of parts and fab work
If so please post a link.
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
-
- Posts: 109
- Joined: Mon Jan 23, 2017 2:11 pm
- Location: South side chicago il
Re: Turbo
Have not done a write up yet. Will try to post something tonight
-
- Posts: 20
- Joined: Sun Apr 18, 2021 11:22 pm
Re: Turbo
what were you looking to do.
i have a 14' ss thats going twin turbo, i made my own kit using agp manifold adapters.
i have a 14' ss thats going twin turbo, i made my own kit using agp manifold adapters.