WTD For 2014 Caprice

If you're looking for a specific Caprice PPV-related part, service, or car post your requests here.
Forum rules
SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Post Reply
Turbopowered68
Posts: 141
Joined: Wed Nov 04, 2020 7:09 pm

WTD For 2014 Caprice

Post by Turbopowered68 »

Windshield washer bottle lid
Headlight switch
stuff in the pictures
L & R fender vents
Attachments
20201111_114802.jpg
20201111_114802.jpg (4 MiB) Viewed 5801 times
20201111_113215.jpg
20201111_113215.jpg (4 MiB) Viewed 5801 times
Inked20201111_113131 -1_LI.jpg
Inked20201111_113131 -1_LI.jpg (3.35 MiB) Viewed 5801 times
20201111_113213.jpg
20201111_113213.jpg (8 MiB) Viewed 5801 times
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: WTD For 2014 Caprice

Post by smwalker »

What are you looking for in the second pic? the bumper clips?

Whats wrong with your headlight switch? just the dial missing or the entire bezel??

What numbers you need? 1,2 and 3 ? ::
14ppv headlight switch.png
14ppv headlight switch.png (326.5 KiB) Viewed 5787 times
Things I can send you:
Washer Cap: $3.00
Fender Vents: $20.00 for both
Headlight switch: $25.00 (let me know how much you need for a price) (eh the switches are cheap I will include them in the whole assembly)
Bumper Clips (4 new ones) : $2.00
Shipping: $8.00
Total $58.00

Payment Methods:  FB Messenger Pay, Zelle or PayPal (friends and family) to PPVSteve@Gmail.com
Send shipping address in notes.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: WTD For 2014 Caprice

Post by smwalker »

And I think the washer hose you need is about $20. Maybe better just to snip off the tubes and put a length of rubber hose on there. Part #14 Gm part number 92213796
14ppv washer hose.png
14ppv washer hose.png (675.65 KiB) Viewed 5785 times
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Turbopowered68
Posts: 141
Joined: Wed Nov 04, 2020 7:09 pm

Re: WTD For 2014 Caprice

Post by Turbopowered68 »

smwalker wrote: Thu Nov 19, 2020 1:53 pm What are you looking for in the second pic? the bumper clips?

Whats wrong with your headlight switch? just the dial missing or the entire bezel??

What numbers you need? 1,2 and 3 ? ::

14ppv headlight switch.png

Things I can send you:
Washer Cap: $3.00
Fender Vents: $20.00 for both
Headlight switch: $25.00 (let me know how much you need for a price) (eh the switches are cheap I will include them in the whole assembly)
Bumper Clips (4 new ones) : $2.00
Shipping: $8.00
Total $58.00

Payment Methods:  FB Messenger Pay, Zelle or PayPal (friends and family) to PPVSteve@Gmail.com
Send shipping address in notes.
Paypal sent with extra 5% for the purchase.
Thanks
Headlight switch has broken or missing dimmer wheel
ill take all of it
Do you have good driver door panel?
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: WTD For 2014 Caprice

Post by smwalker »

Send you tracking Monday for those parts.

Will post some pics of my drivers door panel, not perfect, but I think it's all there.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Turbopowered68
Posts: 141
Joined: Wed Nov 04, 2020 7:09 pm

Re: WTD For 2014 Caprice

Post by Turbopowered68 »

smwalker wrote: Sun Nov 22, 2020 10:53 am Send you tracking Monday for those parts.

Will post some pics of my drivers door panel, not perfect, but I think it's all there.
Thanks
What about a Spare tire??
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: WTD For 2014 Caprice

Post by smwalker »

No, sold the jack kit to the SS guys. if you need a steelie though ask for someone local to you. We all got some hanging around.
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
smwalker
Administration Staff
Posts: 2201
Joined: Mon Jul 29, 2013 1:44 am
Location: Azusa,CA

Re: WTD For 2014 Caprice

Post by smwalker »

Here is my drivers door panel. Common scratches at the bottom with boots getting in and out. One nik in the upper left hand corner (pic)

Will need a few mounting clips but I will see what I can scrape together for you. Have all the little cover pieces as well just have to gather them up. Some scratches on the trunk release bezel as well. Hope yours is in better shape.

I would want about $150 for it to cover the shipping. Looking at car-part.com you maybe can find something local to you for cheaper. I am not looking forward to finding a box for it!! LOL
IMG_1554.JPG
IMG_1554.JPG (123.1 KiB) Viewed 5685 times
IMG_1555.JPG
IMG_1555.JPG (137.31 KiB) Viewed 5685 times
IMG_1557.JPG
IMG_1557.JPG (114.06 KiB) Viewed 5685 times
IMG_1558.JPG
IMG_1558.JPG (124.3 KiB) Viewed 5685 times
IMG_1559.JPG
IMG_1559.JPG (104.61 KiB) Viewed 5685 times
IMG_1560.JPG
IMG_1560.JPG (152.82 KiB) Viewed 5685 times
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White
Turbopowered68
Posts: 141
Joined: Wed Nov 04, 2020 7:09 pm

Re: WTD For 2014 Caprice

Post by Turbopowered68 »

smwalker wrote: Mon Nov 23, 2020 3:46 pm Here is my drivers door panel. Common scratches at the bottom with boots getting in and out. One nik in the upper left hand corner (pic)

Will need a few mounting clips but I will see what I can scrape together for you. Have all the little cover pieces as well just have to gather them up. Some scratches on the trunk release bezel as well. Hope yours is in better shape.

I would want about $150 for it to cover the shipping. Looking at car-part.com you maybe can find something local to you for cheaper. I am not looking forward to finding a box for it!! LOL

IMG_1554.JPG

IMG_1555.JPG

IMG_1557.JPG

IMG_1558.JPG

IMG_1559.JPG

IMG_1560.JPG
Thanks for the reply
I'll let you know when i am ready to buy.
thanks
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
Turbopowered68
Posts: 141
Joined: Wed Nov 04, 2020 7:09 pm

Re: WTD For 2014 Caprice

Post by Turbopowered68 »

smwalker wrote: Thu Nov 19, 2020 1:53 pm What are you looking for in the second pic? the bumper clips?

Whats wrong with your headlight switch? just the dial missing or the entire bezel??

What numbers you need? 1,2 and 3 ? ::

14ppv headlight switch.png

Things I can send you:
Washer Cap: $3.00
Fender Vents: $20.00 for both
Headlight switch: $25.00 (let me know how much you need for a price) (eh the switches are cheap I will include them in the whole assembly)
Bumper Clips (4 new ones) : $2.00
Shipping: $8.00
Total $58.00

Payment Methods:  FB Messenger Pay, Zelle or PayPal (friends and family) to PPVSteve@Gmail.com
Send shipping address in notes.
Got the parts everything looks great
Thanks
David
2014 Caprice V8
Elgin E-1840 P, LS9 Head gasket, LS7 Lifters, PAC-1218 springs, Trunion upgrade, Single roller timing set, Melling oil pump, ZL1 torque converter, Camaro Trans pan and filter.
1986 GN
212/212 Roller cam, 1.65 HR Rockers, 60-1 turbo, XFI 2.05, E85, Ebay Front mount IC, Husek Built TH200-4R trans, 3.42 gears 3800# .
1968 Chevelle
LQ4, 4L80, 12 bolt w/3.42 gears
Post Reply