Search found 2150 matches
- Thu Jul 28, 2016 12:05 am
- Forum: Stereo / Electronics / Electrical
- Topic: taking the IQ radio apart and soldering the 20 pin connector
- Replies: 46
- Views: 67729
Re: taking the IQ radio apart and soldering the 20 pin conne
Going to try and get in contact with these china guys and see what they got. But if you do not have the connector on the board me myself I wold go something along the lines of two of these items mounted to the side of the case: http://store.haveinc.com/p-52852-canare-rca-jack-flush-mount-blue.aspx&q...
- Wed Jul 27, 2016 10:38 pm
- Forum: Intake/Exhaust/Fuel tech
- Topic: Solo Mach Exhaust Cat-back
- Replies: 3
- Views: 9667
Re: Solo Mach Exhaust Cat-back
Sounds very smoooooth.
- Tue Jul 26, 2016 11:36 pm
- Forum: Stereo / Electronics / Electrical
- Topic: Video input options/pinout diagrams
- Replies: 6
- Views: 11193
Re: Video input options/pinout diagrams
And just thinking one other place you maybe able to get one is from a car they are wrecking in AU. That is if they wold cut it off the dash harness for you. And it would have to me a series 2 of the VE or WM that either had EDI or a BAck Up Camera. Wonder if the radio upgrader's in AU are scooping t...
- Tue Jul 26, 2016 11:15 pm
- Forum: Tech & Tuning Lounge
- Topic: HELP! ABS/StabiliTrak Fault Light on, keeps blowing F5 Fuse
- Replies: 7
- Views: 19838
Re: HELP! ABS/StabiliTrak Fault Light on, keeps blowing F5 F
I recently (2 weeks ago) Bought my PPV. When I drove it off the lot the Stabilitrak fault popped up and continued all the way back home (1 hour drive) The next day I went over the fuses and wiring and didn't actively do anything about it and it went away. Today 2 weeks later after many trips back a...
- Tue Jul 26, 2016 11:08 pm
- Forum: Stereo / Electronics / Electrical
- Topic: Video input options/pinout diagrams
- Replies: 6
- Views: 11193
Re: Video input options/pinout diagrams
I just bumped up the thread where 91C soldered onto his connector pins, take a look at that. But as you are looking at the 20 pin receptacle in the radio pin # 1 will be on your left. Here is the diagram looking at the 20 pin connector so of course #1 is on the right but when you plug it in the wire...
- Tue Jul 26, 2016 11:01 pm
- Forum: Stereo / Electronics / Electrical
- Topic: taking the IQ radio apart and soldering the 20 pin connector
- Replies: 46
- Views: 67729
Re: taking the IQ radio apart and soldering the 20 pin conne
91C, CSC1020-1961BLACK looks like it might be one of the right angle ones. It is going the wrong way for our application but could still work. Did you have any conversation with the guys in China about it? One site shows they have inventory of 960?? Then the next question is is that just connector i...
- Tue Jul 26, 2016 10:20 pm
- Forum: Stereo / Electronics / Electrical
- Topic: Video input options/pinout diagrams
- Replies: 6
- Views: 11193
Re: Video input options/pinout diagrams
If you cannot find a connector for it I think your only option is soldering on RCA leads to the board. The kind of connector it is inside the radio does not lend it's self to jerry rigging something to it. We did not get much info when we purchased the connectors.. The basics we needed of the 20 pin...
- Tue Jul 26, 2016 4:03 pm
- Forum: General Discussion
- Topic: Discontinued Parts List
- Replies: 21
- Views: 54830
Re: Discontinued Parts List
Looking at that left fender liner:
I got this part number train:
92161689 Replaced by 92268803
92251459 Replaced by 92260897 replaced by 92270537 (suspect these might be the 2014 and Up, still should work tho)
I got this part number train:
92161689 Replaced by 92268803
92251459 Replaced by 92260897 replaced by 92270537 (suspect these might be the 2014 and Up, still should work tho)
- Tue Jul 26, 2016 12:27 am
- Forum: Stereo / Electronics / Electrical
- Topic: Programming a new key
- Replies: 23
- Views: 38366
Re: Programming a new key
MOney I am afraid that if your original key now says engine immobilized what you have done along the way is kick it out of the 10 spots that the car has for keys. Which means now you have no master key. What you must do from there is have the Dealer (or anyone with a tech2) go into the menus and add...
- Sun Jul 24, 2016 9:38 pm
- Forum: Body, Appearance, Interior, & Detailing
- Topic: Tail light options
- Replies: 5
- Views: 11353
Re: Tail light options
Converting to LED seems to be about the only option/upgrade. Board member Maurice did it here: http://www.newcaprice.com/forum/viewtopic.php?f=21&t=1253&p=11223&hilit=led#p11223" onclick="window.open(this.href);return false; Will require you send out your BCM to Chris white for...