Search found 229 matches

by Fudgehog
Sun Jun 23, 2019 9:36 pm
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Interesting if they're backwards. I was going by the sticker lol. RF went on right front. Damn. Easy fix. Yeah new stock bolts as I mentioned earlier. They were the correct length. I'll use threadlocker when I redo them.
by Fudgehog
Sun Jun 23, 2019 6:40 pm
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Hey guys I got them on and they work great! Very quiet.. I modified the stock bracket for the technafit lines. Now I just have to bleed the system properly, otherwise front suspension project is done and so is brake upgrade. The stock bolt (bought new ones as mentioned above) had plenty of thread an...
by Fudgehog
Fri Jun 21, 2019 7:07 pm
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

I don't know if this helps but this is the seller I ordered from. They are indeed 4 piston use the 14mm mounting bolt (the ones in my picture) are are made for 345mmx30mm rotors or 13.6" in diameter. Check the description. This seemed like the right package for me. They should be going on this weeke...
by Fudgehog
Fri Jun 21, 2019 3:23 am
Forum: Stereo / Electronics / Electrical
Topic: Remote start adventure (11-13)
Replies: 26
Views: 11766

Re: Remote start adventure (11-13)

What's weird and what I've noticed is that the combination of programming I performed, and I remember reprogramming the theft deterrent module.. I actually have a car alarm. At one point it went off when my friend had the passenger door open and I tried to unlock it and he was in the passenger seat....
by Fudgehog
Thu Jun 20, 2019 5:34 am
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Just wanted to give an update and a visual on part numbers previously referenced. 11570788 is slightly longer than the stock mounting bolt but I can confirm it's the same thread. 11570092 is the stock bolt. They are both 18mm heads. I ordered these through my local dealer. I've attached pictures as ...
by Fudgehog
Wed Jun 12, 2019 6:10 am
Forum: Stereo / Electronics / Electrical
Topic: can I just swap out the radio?
Replies: 37
Views: 7453

Re: can I just swap out the radio?

Just wanted to post that with my 13 I was tired of not hearing the rear door speakers, especially with new Rockfords in, and so I drilled about a 3 1/2" hole in the doors and added a generic speaker grille. I believe it turned out okay, and I'm happy with the result. The sound output difference is n...
by Fudgehog
Fri May 31, 2019 1:48 am
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Googling that part number (23245470) returns a multitude of sites still offering it. For all around 400.
by Fudgehog
Thu May 30, 2019 12:45 pm
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Okay, I can order some new mounting bolts through my dealer as long as the stock ones will indeed work.

I will probably get those brackets from you, I haven't ordered the Brembo kit yet but when I'm closer to, you will definitely hear from me.

Thanks again.
by Fudgehog
Thu May 30, 2019 12:26 pm
Forum: Suspension / Brakes / Steering
Topic: Brembo front calipers using 345mm PPV rotors
Replies: 65
Views: 35982

Re: Brembo front calipers using 345mm PPV rotors

Thanks so much Bill, great information laid out and easy to follow. How much would your brackets be? I recall off the top of my head I might have damaged a bracket if they are the ones right on top the knuckle. I understand those rotors won't work. I'm sure I could reuse stock caliper mounting bolts...