Search found 1605 matches

by smwalker
Thu Oct 31, 2019 3:03 am
Forum: White Auto & Media
Topic: We have secured a supply of new 2011+ Silver boxes!
Replies: 8
Views: 11344

Re: We have secured a supply of new 2011+ Silver boxes!

>> they have the AUX connector as well.<<< Chris could you expand a bit on this? Like a 3.5mm jack in the case? Or something to wire in to the radio plug? Any pics ? Just wondering f it interferes with anything I offer. I know I already sent a USB/AUX kit to one customer waiting on one of your new I...
by smwalker
Wed Oct 30, 2019 4:12 am
Forum: Stereo / Electronics / Electrical
Topic: No Interior light door or auxillary
Replies: 4
Views: 2731

Re: No Interior light door or auxillary

NIce!! That's a new one. I imagine some cops do not like the bulbs on at anytime so they ask the boss to disable and when that does not get done in a month they have all that time on their hands they will break out the leatherman and get to work.
by smwalker
Mon Oct 28, 2019 6:21 am
Forum: Stereo / Electronics / Electrical
Topic: No Interior light door or auxillary
Replies: 4
Views: 2731

Re: No Interior light door or auxillary

Pinout listed in this thread: http://www.newcaprice.com/forum/viewtopic.php?f=21&t=114&hilit=map#p3388 You will see there are two wires that are labeled a similar thing. That is not exactly right. As you will see on the pinout of the the 6 pin connector a page over the labels are a bit more clear. I...
by smwalker
Thu Oct 24, 2019 6:00 am
Forum: Stereo / Electronics / Electrical
Topic: 3rd Brake Light not working
Replies: 4
Views: 3293

Re: 3rd Brake Light not working

Check the one labeled BCM 4 also while you are down there. Man that is a messed up diagram and table. Not sure what is up.
by smwalker
Thu Oct 24, 2019 5:18 am
Forum: Stereo / Electronics / Electrical
Topic: 3rd Brake Light not working
Replies: 4
Views: 3293

Re: 3rd Brake Light not working

The most likely culprit will be the LED board. Here is some info on just replacing the board: CHMSL Replacement Good news is you do not have to take the headliner completely out to get to the CHMSL just lower the back and use a very short or right angle screwdriver (or is it Torx??) to remove the en...
by smwalker
Wed Oct 23, 2019 3:27 am
Forum: Stereo / Electronics / Electrical
Topic: How To - Build your own USB cable for 2011- 2013 PPV's
Replies: 41
Views: 66447

Re: How To - Build your own USB cable for 2011- 2013 PPV's

It seems there is a 1000 file limit to the USB storage devise. Formatting has to be correct also in FAT32. Not sure we have seen a size limit bt the 1000 files can usually fit on a 8MB so no sense going over that if you can't play them.

Link: Discussion of 1000 file limit
by smwalker
Wed Oct 16, 2019 2:48 am
Forum: Stereo / Electronics / Electrical
Topic: How To - Build your own USB cable for 2011- 2013 PPV's
Replies: 41
Views: 66447

Re: How To - Build your own USB cable for 2011- 2013 PPV's

Please give us an update once you install. Have you had your radio programmed yet though?
by smwalker
Tue Oct 15, 2019 6:24 pm
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 39
Views: 27743

Re: Installing factory rear vision camera on 2014

Yea it just ends in the shielding. Does not connect to anything on the radio side.
by smwalker
Tue Oct 15, 2019 6:04 pm
Forum: Stereo / Electronics / Electrical
Topic: Installing factory rear vision camera on 2014
Replies: 39
Views: 27743

Re: Installing factory rear vision camera on 2014

Pin 5 definitely needs a ground, but not the drain wire that is just for the shielding of the video cable.
by smwalker
Wed Oct 09, 2019 3:50 am
Forum: V6 Engine tech (LFX)
Topic: V6 power mods
Replies: 1
Views: 4516

Re: V6 power mods

Think you would be best advised to read up on what the Camaro guys are doing. Whole lot more of them V6 owners than with the PPV.

http://www.superchevy.com/how-to/engine ... l-sixed-up

But would love to read about what you come up with!!