Search found 29 matches

by Odyssey
Wed Jul 27, 2022 12:03 pm
Forum: Caprice PPV's for sale
Topic: 2011 L77 9C1 Caprice
Replies: 2
Views: 1043

Re: 2011 L77 9C1 Caprice

More pictures
by Odyssey
Wed Jul 27, 2022 11:59 am
Forum: Caprice PPV's for sale
Topic: 2011 L77 9C1 Caprice
Replies: 2
Views: 1043

2011 L77 9C1 Caprice

$10,500 Selling my 2011 Loudon County, VA 9c1. Has 94,000 miles, factory carpet, and just an overall clean Caprice. Never had a problem from it, no lifter tick, solid suspension, and its stock with some appearance mods: G8 door handles Painted side mirror caps Holden airbag Holden front grill and re...
by Odyssey
Sun Jul 17, 2022 10:21 am
Forum: Stereo / Electronics / Electrical
Topic: Horn works... but not with airbag installed
Replies: 2
Views: 492

Re: Horn works... but not with airbag installed

Fixed it. There are 3 torx head bolts behind the airbag. All 3 were about hand tight for some reason. I torqued them down and now the horn works fine.
by Odyssey
Sat Jul 16, 2022 11:52 pm
Forum: Stereo / Electronics / Electrical
Topic: Horn works... but not with airbag installed
Replies: 2
Views: 492

Horn works... but not with airbag installed

Another weird problem on my 2014 caprice. With the steering wheel airbag installed I can't push on it and get the horn to sound. But if I remove it and push directly on the plate behind the airbag the horn works great. Has anyone else ran into this? The airbag feels like it's seated all the way, but...
by Odyssey
Mon Jul 04, 2022 1:24 pm
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

Checked with the scanner and they come on when commanded now. The only setting I needed to use in HPTuners was Fan Speed and set the % duty cycle. The other settings will turn the fans on individually, but turning fan speed on and setting the duty cycle will get both fans spinning. Thank you guys so...
by Odyssey
Mon Jul 04, 2022 8:58 am
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

You may be right on the U401 code, it seemed to clear on its own after starting the car and hasn't came back. Good news is my fans are working! I removed all the accessory battery components. There was at the very least a parasitic draw there. Also noticed when I commanded fans on and changed the du...
by Odyssey
Sat Jul 02, 2022 10:30 pm
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

Beginning to think this is a problem with a short or some shoddy upfitter wiring. I'm now getting a DTC for U0401 Invalid Data Received from ECM. Also getting multiple permanent DTCs for my throttle body voltage, reads roughly 20% at idle. Also radio always has power, even with key out of ignition. ...
by Odyssey
Wed Jun 29, 2022 4:56 pm
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

The smaller connector in your picture is number 4 in the diagram in my post and that's the "X100 Front Fascia Harness to Body Harness" connector. It doesn't have any of the cooling system wiring running through it. It looks like it has wires for the parking lamps in the bumper fascia. 201...
by Odyssey
Wed Jun 29, 2022 2:42 pm
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

I ran the test with my oscilloscope and was able to see wave lengths by backprobing the MAF sensor while engine running and using a ground lug in the engine bay. Good sanity check because that was the first time I'd seen my scope produce results. I tried the fan connector again, this time using same...
by Odyssey
Tue Jun 28, 2022 8:52 pm
Forum: HVAC & cooling systems
Topic: 2014 WN cooling fans won't turn on
Replies: 36
Views: 7835

Re: 2014 WN cooling fans won't turn on

Got a little free time and tried to track this down. On the oscilloscope and my multimeter that reads HZ% I'm seeing no signal on the small wire when I command the fans on or turn my AC on. I'm putting the red lead to the small black/white wire and my black lead to ground on the connector. Just want...