Search found 28 matches

by Skyhighsami
Fri Oct 30, 2020 8:48 pm
Forum: Drivetrain tech
Topic: LS3 Tremec 6 speed and 1LE diff
Replies: 11
Views: 9976

Re: LS3 Tremec 6 speed and 1LE diff

my cam only G8 made over 450 , and my friends cam only LS2's made between 410-420 the compression ratios in the L76/77 is 10.4 , LS3 10.7 , LS6 10.5 and LS2 10.9 , so other than bore and having a very conservative cam , the L76/77 isnt that far off from the LS3 people have put LS3 cams into their L...
by Skyhighsami
Fri Oct 30, 2020 8:37 pm
Forum: Caprice PPV's for sale
Topic: 2012 Chevrolet Caprice PPV
Replies: 2
Views: 4529

Re: 2012 Chevrolet Caprice PPV

Do you still have this and where is the spots on the wrap are?
by Skyhighsami
Fri Oct 30, 2020 8:24 pm
Forum: Caprice PPV's for sale
Topic: Bone stock V8 2012 Hugo Blue 9C1...
Replies: 3
Views: 5876

Re: Bone stock V8 2012 Hugo Blue 9C1...

Hello all, Here are the basics: - 1 of 63 Hugo Blue 9C1's for 2012 - 109,652 miles - 5,324 hours/2,876 idle hours - Goodyear RSAs with 5/32" all the way around - usable spare and complete jack kit present - two plugged trunk holes - two holes in the interior, one on the center stack trim and t...
by Skyhighsami
Fri Oct 30, 2020 8:05 pm
Forum: Caprice PPV's for sale
Topic: Bone stock 2013 9C1 PPV 87,500 miles for sale
Replies: 21
Views: 19943

Re: Bone stock 2013 9C1 PPV 87,500 miles for sale

How many holes are in it? I can see it had a spot light but did they put a bunch of holes in the roof and etc?
by Skyhighsami
Fri Oct 30, 2020 6:08 pm
Forum: Drivetrain tech
Topic: Another 3.45 thread...
Replies: 10
Views: 10165

Re: Another 3.45 thread...

:lol: Auto correct turn diff into dirt, sorry lol. I've had cars with aggressive gearing I mean my Trailblazer SS is 4.11 on 28" tires. My Procharged Silverado was 4.11 but since it's build changed I'm doing the 4.11s in my LQ9 243 head Fast LSXRT intake Stage 3 BTR cam Yukon. I'm curious how t...
by Skyhighsami
Fri Oct 30, 2020 1:27 pm
Forum: New user - intro forum
Topic: New member, hood cowl
Replies: 8
Views: 13297

Re: New member, hood cowl

Has anyone been able to graft in the 5th or 6th gen ZL1 scoop on the hood? I really like the 5th gen vented style duct but I don't know in the pictures it looks a little narrow and small. Does it look like that in person as well? Are there any other possible style hoods? The G8 nostrils look awesome...
by Skyhighsami
Thu Oct 29, 2020 4:32 pm
Forum: Drivetrain tech
Topic: Another 3.45 thread...
Replies: 10
Views: 10165

Re: Another 3.45 thread...

What about getting the 1LE rear diff with it's 3.91 dirt? Has anyone tried those? With the factory running gear or a LS3 and Tremec 6 speed. I'm really wanting a PPV to swap a LS3 and Tremec 6 speed with a 1LE diff.
by Skyhighsami
Thu Oct 29, 2020 3:28 pm
Forum: Drivetrain tech
Topic: LS3 Tremec 6 speed and 1LE diff
Replies: 11
Views: 9976

Re: LS3 Tremec 6 speed and 1LE diff

If your friend has a cam swapped LS2 that makes 420whp something is wrong. My Trailblazer when it was just a bolt on truck made 350 at the wheel through a 3600 stall, 14 bolt rear end 4.10 gears and sticky drag radials.
by Skyhighsami
Thu Oct 29, 2020 12:01 pm
Forum: Drivetrain tech
Topic: LS3 Tremec 6 speed and 1LE diff
Replies: 11
Views: 9976

Re: LS3 Tremec 6 speed and 1LE diff

a .030 bored 6.0 is half way to the 6.2 bore , being he had the bottom end let go , im guessing some of his problems started there a cam only L77 can make north of 450 , and most cam only LS2's made 410-425 LS6 and LS2 heads are the same , the early 5.3 heads had smaller ports and smaller combustio...
by Skyhighsami
Thu Oct 29, 2020 11:58 am
Forum: Drivetrain tech
Topic: LS3 Tremec 6 speed and 1LE diff
Replies: 11
Views: 9976

Re: LS3 Tremec 6 speed and 1LE diff

The motor let go because of an oil issue. He and I used the Corvette because the LS2 in the Trailblazer sucks. On the 376 B-8 had the Corvette install. The LS2 ran fine the bearings lost oil distribution for some reason. A LS2 makes 395hp in a Trailblazer and 400hp in cars. So putting a cam in a LS2...