Circuit Werks 2” Headers and mid pipes
Circuit Werks 2” Headers and mid pipes
Seeing if anyone has used these headers and mid-pipe. Wondering if the fit with no modifications or will I need to do anything to make them fit. They are for the ss so I’d think at most would be the oil cooler delete.
Re: Circuit Werks 2” Headers and mid pipes
never heard of them , but guessing they are another knock off part either copied from kooks or arh
also the SS's have a engine oil cooler
also the SS's have a engine oil cooler
-
- Posts: 65
- Joined: Tue Oct 19, 2021 5:54 pm
Re: Circuit Werks 2” Headers and mid pipes
I have them currently there’s definitely modifications needed mainly with a hammer and you’ll need to extend the mid section and change the end on the cat back but they will work and I’m completely happy with my purchase of them they were also cheaper when I bought them 2 years ago at $630
- Attachments
-
- IMG_2174.jpeg (162.34 KiB) Viewed 974 times
Re: Circuit Werks 2” Headers and mid pipes
If they're for an SS, no cooler delete is required. Mine were another brand but I did have an issue with one of the tubes rubbing on the steering shaft, necessitating dimpling that tube to clear it.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419