Page 1 of 1
When replacing rear springs, what else should be done?
Posted: Wed Nov 02, 2016 9:33 pm
by v8suprcapric
I'm replacing my front and rear springs and for the front since they'll be apart I'm replacing the strut bushings and bearings. Is there anything I should be replacing in the rear since I'll have them apart too?
Re: When replacing rear springs, what else should be done?
Posted: Thu Nov 03, 2016 12:54 pm
by Silversled
Check the rear sway bar link ball fittings. One of mine was completely separated from the link.
Re: When replacing rear springs, what else should be done?
Posted: Thu Nov 03, 2016 2:52 pm
by kevink
Check the lower spring isolators/insulators. The ones on my 5K mile car were a little beat up, so I can imagine a higher mileage car needing replacements.