Front fender vent removal

Discussion on body issues/mods, appearance, interior/trim, and detailing (i.e. how to keep your car looking showroom new, or a reasonable facsimile thereof...).
Post Reply
bullitt773
Posts: 21
Joined: Sat Jul 08, 2023 10:59 am

Front fender vent removal

Post by bullitt773 »

Hi, I'd like to remove and re-paint these. Does anyone know how to remove these?
Pursuit
Administration Staff
Posts: 980
Joined: Tue Apr 23, 2013 3:39 pm
Location: Omaha, NE area

Re: Front fender vent removal

Post by Pursuit »

If I remember correctly, I just squeezed the horizontal bar in the middle to pull the top and bottom together.

Maurice
Maurice Sheil

mhsheil@gmail.com

2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Holdenking5150
Posts: 12
Joined: Tue Sep 06, 2022 6:22 am

Re: Front fender vent removal

Post by Holdenking5150 »

bullitt773 wrote: Thu Sep 07, 2023 11:35 am Hi, I'd like to remove and re-paint these. Does anyone know how to remove these?
Did pulling them by hand work? I wasn't sure if you had to go behind the fender to remove them or not.
Pursuit
Administration Staff
Posts: 980
Joined: Tue Apr 23, 2013 3:39 pm
Location: Omaha, NE area

Re: Front fender vent removal

Post by Pursuit »

They are just a press fit. With tabs top and bottom.

Maurice
Maurice Sheil

mhsheil@gmail.com

2011 Caprice Phantom Black 9C3
2012 Impala 9C1
1995 9C1 Caprice
1996 GMC Sierra C1500
1996 Chevrolet K2500 Extended Cab, long box, 454, 91,000 rust free miles
1974 SJ Grand Prix 455 well optioned with factory moon roof
Post Reply