New member, hood cowl
Forum rules
Welcome new members, please make your first post in this section. Say hello & tell us a little bit about you and your car. We're happy to see you here!
Welcome new members, please make your first post in this section. Say hello & tell us a little bit about you and your car. We're happy to see you here!
-
- Posts: 2
- Joined: Sun Dec 08, 2019 1:47 am
New member, hood cowl
Howdy all, just got accepted to this community, I'm Sean I have a 2012 black caprice. I'm hoping I can help with questions, give some good answers, and vice versa. Super excited to get this thing modified. Now has anyone put any type of cowl or scoop on their hood? Thanks in advance.
Re: New member, hood cowl
Welcome!!
I think an easier project was folks installing a Camaro duct. Can't seem to find info on that. ANyone??
Then if you want to get a little more advanced and expensive there are a few options.
User Mercialogo grafted in some metal G8 ducts into his with great results:
his build thread: viewtopic.php?f=36&t=2641#p21007
Ryan Bell owns a body shop out here in CA and he has been through a few different styles. I believe these are fiberglass designs grafted into a stock metal hood. Lots of hours involved in blending and smoothing.
Lastly there was a group buy on some hoods made in Saudi Arabia. cost was about $1300-$1500 Think about 10 made it over to the US. There were two styles one with a front inlet and one without.
I think an easier project was folks installing a Camaro duct. Can't seem to find info on that. ANyone??
Then if you want to get a little more advanced and expensive there are a few options.
User Mercialogo grafted in some metal G8 ducts into his with great results:
his build thread: viewtopic.php?f=36&t=2641#p21007
Ryan Bell owns a body shop out here in CA and he has been through a few different styles. I believe these are fiberglass designs grafted into a stock metal hood. Lots of hours involved in blending and smoothing.
Lastly there was a group buy on some hoods made in Saudi Arabia. cost was about $1300-$1500 Think about 10 made it over to the US. There were two styles one with a front inlet and one without.
-
- Posts: 220
- Joined: Wed Feb 06, 2019 11:49 pm
Re: New member, hood cowl
Really dig that zl1 hood scoop.
-
- Posts: 2
- Joined: Sun Dec 08, 2019 1:47 am
Re: New member, hood cowl
Awesome, thank you for these references
Re: New member, hood cowl
Where are you located?
I have one in my basement that needs to be grafted onto a hood.
Jim
I have one in my basement that needs to be grafted onto a hood.
Jim
Jim Chesnutt
1968 Camaro -my first car.
1995 Black/White 9C1 Caprice
2012 Alto Gray Metallic 9C1 Caprice--The HoDag-Solo axle back exhaust, improved racing OTR CAI intake.
2013 Black/White 9C1--NADACOP-DOD Delete with BTR Stage II cam, Kooks Headers, Solo Hi-flow Cats and Header Back Mach Balanced kit, WestBendDyno tuned.
1968 Camaro -my first car.
1995 Black/White 9C1 Caprice
2012 Alto Gray Metallic 9C1 Caprice--The HoDag-Solo axle back exhaust, improved racing OTR CAI intake.
2013 Black/White 9C1--NADACOP-DOD Delete with BTR Stage II cam, Kooks Headers, Solo Hi-flow Cats and Header Back Mach Balanced kit, WestBendDyno tuned.
Re: New member, hood cowl
id get rid of that rubbish hsv badge though
2012 holden caprice v
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
1986 vl berlina turbo bt1
2001 toyota echo!!!!!!!!!!!!
-
- Posts: 28
- Joined: Tue Aug 13, 2019 7:29 pm
Re: New member, hood cowl
Has anyone been able to graft in the 5th or 6th gen ZL1 scoop on the hood? I really like the 5th gen vented style duct but I don't know in the pictures it looks a little narrow and small. Does it look like that in person as well? Are there any other possible style hoods? The G8 nostrils look awesome but they don't add any clearance right?
Re: New member, hood cowl
I know this is bringing an OLD thread back to life, but.........
I've seen pictures of the Camaro SS/ZL1 Hood VENT installed in the Caprice Hood, but I haven't seen ANY instructions, tips, anything on how to do it!
Do you just measure it out, grab the Sawzal, and go to town???
Call Chip Foose and the "A" Team???
Thanks....
Gene
I've seen pictures of the Camaro SS/ZL1 Hood VENT installed in the Caprice Hood, but I haven't seen ANY instructions, tips, anything on how to do it!
Do you just measure it out, grab the Sawzal, and go to town???
Call Chip Foose and the "A" Team???
Thanks....
Gene
Re: New member, hood cowl
I just grafted in a ZL1 carbon insert. Looks pretty good I think.