2012 caprice lsa build, my quest for 10s in the family sedan

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Maxspeed96ct
Posts: 89
Joined: Fri Jul 21, 2017 6:27 am

2012 caprice lsa build, my quest for 10s in the family sedan

Post by Maxspeed96ct »

cars been done for a few weeks, but still need to upgrade the fuel system.

Basic mod list
-CNC ported LSA heads with btr springs, arp head bolts and ls9 head gaskets
- rcr PB blower cam 219/237 ...
-id850 injectors
-cx racing Heat exchanger, roush hx coolant tank in the pocket of the cabin filter area
-Zl1 lid with 12 an outlets and reinforced milled brick
-Air raid 5" intake with ls7 card maf
-Ported TB
-Lsa blower with slightly ported snout and 2.5" pulley
-kooks 1 7/8 headers
- custom self made ( not the prettiest ) 3" exhaust with two vibrant bullet resonators up front, two vibrant ultra quiets out back with a j-pipe. (Maybe adding a mid muffler soon cause its loud)
-Lsa coil packs and valve covers
-mishimoto catch can with an fittings

-Stock ss springs
-ZL1 / ctsv- converter with Camaro pan, also removed the thermostat from the factory trans cooler for more flow.
-3.27 Camaro diff
-2010 Camaro brembos all around using powerstop rotors from a 2016 ss sedan

at 88k both engine mounts and the trans mount needed to be replaced. Good idea to do them if your installing headers or doing exhaust work

Hp tuners Tuned by me

Car rolls out pretty good but tune is very soft due to lack of fuel, that upgrade will be happening in the next few weeks.

weld wheels 17x10 rear 18x8 front

Pics


ImageUntitled

ImageUntitled

ImageUntitled


ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

ImageUntitled

Image
Untitled

ImageUntitled
Combatcarl
Posts: 20
Joined: Thu Oct 26, 2017 9:39 pm

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by Combatcarl »

Niiiiiiice. The LSA, any ppv specific issues that came up or is it all the same as the g8/SS Guys?
Maxspeed96ct
Posts: 89
Joined: Fri Jul 21, 2017 6:27 am

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by Maxspeed96ct »

all pretty much the same as the g8 and ss
bluethunder
Posts: 165
Joined: Tue Jan 10, 2017 12:43 pm

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by bluethunder »

I think I have seen this car some place before.......Great job looks awesome!!!
B4CU
Posts: 53
Joined: Sat Mar 24, 2018 8:20 pm

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by B4CU »

I subscribed so hard. Great taste.
2013 White 9C1 Caprice
Silversled
Posts: 270
Joined: Fri Aug 12, 2016 7:13 am
Location: Tampa, FL

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by Silversled »

David,
Your car is looking awesome. Hope tuning is going well for you.

Could you give more info on the Welds for both front and back (model and offset) and the what tires you are running (Make, model, size)?
2014 Chevrolet Caprice PPV
2014 Chevrolet Stingray Z51
2016 AMG C63
2015 BMW X5 iDrive 50i
Black6
Posts: 116
Joined: Tue Jan 30, 2018 6:36 pm
Location: Indy

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by Black6 »

Would the stock coil packs/valve covers not work with the blower?

Are you just going to do the boost a pump/pump controller re-flash?

Flex fuel? Please tell me flex fuel!!
Black 2014 V8

Be jealous of my factory carpet.
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by s/c'd cav »

Black6 wrote:Would the stock coil packs/valve covers not work with the blower?

Are you just going to do the boost a pump/pump controller re-flash?

Flex fuel? Please tell me flex fuel!!
the coils need to move , either by using the LSA/9 valve covers , or moving them , they sit up to close to the sc and fuel rails
Silversled
Posts: 270
Joined: Fri Aug 12, 2016 7:13 am
Location: Tampa, FL

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by Silversled »

Black6 wrote:Would the stock coil packs/valve covers not work with the blower?

Are you just going to do the boost a pump/pump controller re-flash?

Flex fuel? Please tell me flex fuel!!

Maybe Dave will chime in but he has since sold this car.

I believe he started with a reflashed fuel computer, then a DSX supplementary pump, then ended up with a full FORE return fuel system.

He and I exchanged some messages on dealing with Flex fuel. His fuel system retained the Flex sensor and I'm sure he got some of the tables updated before selling it.
2014 Chevrolet Caprice PPV
2014 Chevrolet Stingray Z51
2016 AMG C63
2015 BMW X5 iDrive 50i
kras007
Posts: 27
Joined: Sun Feb 26, 2017 12:54 am

Re: 2012 caprice lsa build, my quest for 10s in the family s

Post by kras007 »

What region of the country are you located? Hoping your in the tri state or New England area.
Post Reply