Header Help!!

Discussion on fuel delivery & intake/exhaust tech & mods.
CrashTestDummy
Posts: 2300
Joined: Sat Feb 07, 2015 2:31 pm
Location: Pearland, Texas

Re: Header Help!!

Post by CrashTestDummy »

I read good things about ARH on the Tahoe/Yukon forum as well. We’re probably sticking with the OEM manifolds, but if I were going with long tubes, i’d Definitely look at ARH, or JBA, as well as Kooks.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav »

ive got 2" ARH's sitting and waiting to get ceramic coated , then ill be putting them on the ppv
PPV_Farmer
Posts: 10
Joined: Wed Mar 14, 2018 11:09 am
Location: MN

Re: Header Help!!

Post by PPV_Farmer »

Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
2011 9C3
2013 9C1
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav »

PPV_Farmer wrote:Has anybody tried the JBA headers for a SS? There about the cheapest I've yet to find...540 for uncoated and 650 for ti ceramic
there is quite a few that have used the JBA ss headers
PPV_Farmer
Posts: 10
Joined: Wed Mar 14, 2018 11:09 am
Location: MN

Re: Header Help!!

Post by PPV_Farmer »

Any opinions on figment/quality? Sorry if it's been talked about already I'm new here and haven't dug that deep in the forum yet. Thanks
2011 9C3
2013 9C1
s/c'd cav
Posts: 1382
Joined: Mon May 30, 2016 3:12 am
Location: PHOENIX AZ

Re: Header Help!!

Post by s/c'd cav »

they are a good part and fit with out having to delete or move the engine oil cooler
User avatar
Mooseman
Posts: 1075
Joined: Mon Jun 12, 2017 11:35 pm
Location: Ottawa, ON Canada
Contact:

Re: Header Help!!

Post by Mooseman »

Where did you find those prices?
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
PPV_Farmer
Posts: 10
Joined: Wed Mar 14, 2018 11:09 am
Location: MN

Re: Header Help!!

Post by PPV_Farmer »

Jbaspeedshop.com or carparts.com was about the same price on the headers and I think the mid pipe was cheaper... 250 or so I think
2011 9C3
2013 9C1
bluethunder
Posts: 165
Joined: Tue Jan 10, 2017 12:43 pm

Re: Header Help!!

Post by bluethunder »

I have JBA's waiting to go on as soon as I finish up my DOD delete. I will post my experience
bluethunder
Posts: 165
Joined: Tue Jan 10, 2017 12:43 pm

Re: Header Help!!

Post by bluethunder »

JBA's are on. Perfect fit on my 2013. I was able to leave all the bubble wrap and plastic that protected them for shipment on during installation to keep them from getting scratched. Great fit with no issues!
Post Reply