Tap Shift for a 9C1 with a G8 Shifter

Need custom module programming for your Caprice PPV? Chris White is here to answer your questions.
Forum rules
Please note & respect that Chris has full-time employment and has only specific contact hours for his business. General questions can be posted here, but for specific individual needs please contact him via his website. Hours of operation are SAT & SUN from 10AM to 4PM Central time. Please only expect responses to EMAILS & forum posts during these times.
Post Reply
91C02920
Posts: 122
Joined: Mon Nov 02, 2015 7:19 pm

Tap Shift for a 9C1 with a G8 Shifter

Post by 91C02920 » Thu Dec 03, 2015 4:58 pm

Hi, I wanted to know if you can add Tap Shift to a 9C1 using a G8 shifter (or 9C3 shifter same difference as far as I can tell).
My assumption is yes, as you seem to have done it for Kevin Sullivan, but honestly I don't know if that was a one off of some sorts, or just putting in the factory tap shift, and I don't see a tap shift option on the order page.

Also, do you need my BCM or can I send in any BCM I get from the junk yard?
I wanted to ask in case you need to copy the factory setup for my car for some reason.

Thanks

GTPprix
Posts: 260
Joined: Thu Nov 14, 2013 8:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix » Thu Dec 03, 2015 10:31 pm

Yes but please contact us from our website.
Chris White
http://www.whiteautoandmedia.com" onclick="window.open(this.href);return false;
2015 Jeep SRT - Stock for a hot minute.
2016 SRX - Custom BCM/HMI - More to come
2016 Yukon Denali XL - Custom BCM/HMI/IPC

S13REMI
Posts: 123
Joined: Sun Oct 11, 2015 4:59 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by S13REMI » Sat Dec 12, 2015 5:35 pm

also very interested in this. tried reaching out to you via the website and never heard back.
2012 CAPRICE 460WHP! NIGHT FURY CAM, LONG TUBES, OTR INTAKE, NEW ERA TUNE, COILOVERS, C6 Z06 WHEELS. (BIGGEST EVER ON A CAPRICE)
Image

GTPprix
Posts: 260
Joined: Thu Nov 14, 2013 8:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix » Sun Dec 13, 2015 12:33 am

S13REMI wrote:also very interested in this. tried reaching out to you via the website and never heard back.
When did you contact us? We are only open on the weekends but typically try to reply at night during the week if at all possible.
Chris White
http://www.whiteautoandmedia.com" onclick="window.open(this.href);return false;
2015 Jeep SRT - Stock for a hot minute.
2016 SRX - Custom BCM/HMI - More to come
2016 Yukon Denali XL - Custom BCM/HMI/IPC

S13REMI
Posts: 123
Joined: Sun Oct 11, 2015 4:59 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by S13REMI » Sun Dec 13, 2015 2:46 pm

about a month ago. Ill do it again today
2012 CAPRICE 460WHP! NIGHT FURY CAM, LONG TUBES, OTR INTAKE, NEW ERA TUNE, COILOVERS, C6 Z06 WHEELS. (BIGGEST EVER ON A CAPRICE)
Image

GTPprix
Posts: 260
Joined: Thu Nov 14, 2013 8:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix » Mon Dec 14, 2015 7:25 pm

FYI didn't get anything for a PPV (nothing in our spam either).
Chris White
http://www.whiteautoandmedia.com" onclick="window.open(this.href);return false;
2015 Jeep SRT - Stock for a hot minute.
2016 SRX - Custom BCM/HMI - More to come
2016 Yukon Denali XL - Custom BCM/HMI/IPC

cal30_sniper
Posts: 94
Joined: Thu Aug 04, 2016 6:17 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by cal30_sniper » Mon Nov 21, 2016 4:21 pm

Dragging this up, I just inquired on your website about this feature as well. I'm stuck between doing the BCM re-program, or modifying the shifter and using the Holden sport/TC switch like PPV did in his swap. I'd prefer to do it as per the factory and retain the tap shift function of the G8/9C3.
-2011 Caprice 9C1, 11k mile non-issue car
-1973 Firebird Formula, restoration in progress
-1986 C20 Suburban 454/5-speed, the toy hauler
-1991 BMW 325i
-2005 Jeep Grand Cherokee 4.7L, the wifemobile

Maxspeed96ct
Posts: 77
Joined: Fri Jul 21, 2017 11:27 am

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by Maxspeed96ct » Fri Sep 29, 2017 10:37 am

Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?

Big Rich 01
Posts: 15
Joined: Sat Jan 02, 2016 2:36 am

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by Big Rich 01 » Fri Oct 27, 2017 3:10 am

Maxspeed96ct wrote:Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?

ditto
2013 9C1 6.0 (27,xxx) 14.142 @ 103
2009 Malibu LTZ
1988 2wd Suburban Silverado
1972 Chevelle
1969 Camaro 350/350 X44

91C02920
Posts: 122
Joined: Mon Nov 02, 2015 7:19 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by 91C02920 » Tue Nov 07, 2017 8:12 pm

Big Rich 01 wrote:
Maxspeed96ct wrote:Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?

ditto

Maxspeed96ct got his done and posted details on the wires:
http://newcaprice.com/forum/viewtopic.php?f=9&t=2377" onclick="window.open(this.href);return false;

Also check this thread on how to wire it up:
http://newcaprice.com/forum/viewtopic.php?f=21&t=1578" onclick="window.open(this.href);return false;

I did exactly as I posted there.

Both Maxspeed96ct and I didn't need any special programing to get TUTD to work in our cars after it was wired according to factory, so install and wire your shifter up first and test it out. if it doesn't work for some reason, Chris would be the man to talk to .

Post Reply