Page 1 of 1

Motor Oil Dipstick Tube install

Posted: Tue Oct 08, 2019 3:18 pm
by Cporter
After 6 months, finally got the motor back together and everything installed from Texas Speed. Anyone have pics or advise on how to put dipstick tube back in?

Can't remember how and where it gets fished through. Any help would be appreciated. 2013 6.0.

Thanks,
Chuck

Re: Motor Oil Dipstick Tube install

Posted: Tue Oct 08, 2019 3:48 pm
by Cporter
I had the heads off. I can't remember if the tube goes in before exhaust manifold or after.
Looks like it went between 2 and 4 exhaust ports, but I'm not positive.

Thanks,
Chuck

Re: Motor Oil Dipstick Tube install

Posted: Tue Oct 08, 2019 10:16 pm
by Ilikemtb999
It goes in after the exhaust and goes between I believe 4-6 not 2-4. I can double check in the morning. If you look up from underneath you can see how it goes thru the motor mount into the block.

Re: Motor Oil Dipstick Tube install

Posted: Tue Oct 08, 2019 10:55 pm
by Cporter
Thanks very much !
Chuck

Re: Motor Oil Dipstick Tube install

Posted: Wed Oct 09, 2019 12:13 pm
by Ilikemtb999
F0FCCAA0-9F96-4C63-A4DA-CBC51F4ADE44.jpeg
F0FCCAA0-9F96-4C63-A4DA-CBC51F4ADE44.jpeg (2.96 MiB) Viewed 10195 times

Re: Motor Oil Dipstick Tube install

Posted: Wed Oct 09, 2019 3:23 pm
by Cporter
Appreciate that.

Re: Motor Oil Dipstick Tube install

Posted: Wed Oct 09, 2019 3:46 pm
by Ilikemtb999
I can take better pics if you need buy once you get it in that area it’s pretty self explanatory.