New Caprice - Discussion forums

The worldwide owner-to-owner online support system for the Chevrolet Caprice PPV
It is currently Mon Dec 18, 2017 10:03 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Oct 10, 2017 2:04 pm 
Offline

Joined: Fri Jul 21, 2017 11:27 am
Posts: 38
:D I'll start with the tap shift. You need a g8 shifter, and then you run wire from pin 1 on the shifter to pin 17 on the green connector of the BCM
next you need a wire from pin 4 on the shifter goes to pin 20 on the bcm green connector .

I used part number snac-a021t-m0.64 for terminals on the BCM. The two for the other side on the shifter I got from steve walker but Ill try to get the numbers for you guys. Youll leed to barrow or buy a molex crimper tool.

No special programing is needed but the gears and sport mode do not display on the dash. Need to use your noggin as if it was a real manual (don't worry the ecu will still down shift for you as needed.
To really make your sport shifts feel sporty Id highly recommend a custom tune.

There's a few thread on the center console. I used these threads for references.

viewtopic.php?f=20&t=1065

I still have yet to hook up a TC switch, just have the oem one wired in for now. The one I got was from a v6 g8 but I need the connector, I didn't think it was going to be different.

also missing some odds and ends like the piece for the passenger side handle and the cup holders.

Here are some pics so far

Ill add to this thread as I have time.


ImageUntitled by david B, on Flickr



ImageCaprice by david B, on Flickr

ImageCaprice by david B, on Flickr


ImageCaprice by david B, on Flickr


the shifter connector

ImageCaprice by david B, on Flickr

the g8 shifter pin out
ImageCaprice by david B, on Flickr


BCM green connector pin out
ImageCaprice by david B, on Flickr


Last edited by Maxspeed96ct on Tue Oct 10, 2017 6:58 pm, edited 3 times in total.

Top
 Profile  
 
PostPosted: Tue Oct 10, 2017 2:06 pm 
Offline

Joined: Fri Jul 21, 2017 11:27 am
Posts: 38
ImageCaprice by david B, on Flickr


center cubby in the making

ImageUntitled by david B, on Flickr


Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 12:06 am 
Offline

Joined: Mon Nov 02, 2015 7:19 pm
Posts: 100
Quote:
No special programing is needed
:)

Great to hear the TUTD works with just wiring it up!


Install looks great. I really like the cubby box you are making. I really need one of those for my car.


Top
 Profile  
 
PostPosted: Thu Nov 09, 2017 12:10 pm 
Offline

Joined: Fri Jul 21, 2017 11:27 am
Posts: 38
Just to update, i'm waiting on cup holders to 100% finish.

But I wanted to share what i used for a traction and trunk button.

Got the traction/trunk button from GM parts direct 92247604 for 25$ and steve walker had the white connector.

The terminal pins are mouser part # 1123343-1

ImageUntitled by david B, on Flickr

ImageUntitled by david B, on Flickr

ImageUntitled by david B, on Flickr


Top
 Profile  
 
PostPosted: Wed Nov 15, 2017 1:32 am 
Offline

Joined: Fri Jul 21, 2017 11:27 am
Posts: 38
99% done ImageUntitled by david B, on Flickr


Top
 Profile  
 
PostPosted: Fri Dec 15, 2017 9:30 pm 
Offline

Joined: Wed Mar 20, 2013 12:13 am
Posts: 230
Maxspeed96ct wrote:
99% done ImageUntitled by david B, on Flickr



I've been looking for that white connector forever. Still can't find one


Top
 Profile  
 
PostPosted: Fri Dec 15, 2017 11:19 pm 
Offline

Joined: Mon Jul 29, 2013 6:44 am
Posts: 1174
Location: Azusa,CA
gregc wrote:
I've been looking for that white connector forever. Still can't find one


Just realized the info on it is kind of hidden in an unrelated titled thread so some might miss it. But link to info:
viewtopic.php?f=21&t=1022&start=10#p13796

I got a bunch of the white connectors as a sample so anyone that needs one let me know. Just do not have any of the terminals, but mouser has them.

_________________
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group