New Caprice - Discussion forums

Bottom end stock 2011 GM 6.0L, 65,500 miles, (block, crank, pistons, rods, bearings, etc.); compression test 165/175 psi all cylinders; top end all new by Texas Speed; LS3 heads, cam (duration @ .050 In-231, Ex-246, Lift- In-.376, Ex-.362…@1.7, In-.640, Ex-.615. Lobe separation 112, Intake Center Line 109), valves, lifters, springs, pushrods, intake, throttle body and all accessories necessary to install on 2011 6.0L; about 1000 miles or so; runs great; cost, $8.2K in labor and material; build completed Feb, 2018; asking $7,500; dated accounting, pics and video available; offers accepted!
JWB