Canuck Caprice
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Re: Canuck Caprice
Awesome gains! Thanks for sharing!
Other than finding and fixing a leak, I was planning to leave my exhaust alone. Guess you just screwed that up for me.
Other than finding and fixing a leak, I was planning to leave my exhaust alone. Guess you just screwed that up for me.
CapriceX2
2011 Caprice 9C3 - TSP 220R W/ DOD delete, 10.8:1 Compression, Custom Stainless Exhaust
1995 Caprice Classic Wagon
1996 K2500 6.5L diesel
2011 Caprice 9C3 - TSP 220R W/ DOD delete, 10.8:1 Compression, Custom Stainless Exhaust
1995 Caprice Classic Wagon
1996 K2500 6.5L diesel
-
- Posts: 2304
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Canuck Caprice
These things are insanely-sensitive to ANY exhaust leak, ANYWHERE!! I've cobbled something together to fix the exhaust leak on our '12 that I'm not proud to display, but happy there's no longer a CEL in the dash, and the thing passes inspection.
Be very careful how you proceed.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Re: Canuck Caprice
Finally finished my console project, kinda. After receiving the wiring kit from Steve, I was able to wire up the trunk release, traction control and the TUTD however the TUTD isn't working. Wonder if I wired it wrong in the BCM. Something I'll write up in a separate thread.
Yeah, that 9c3 shifter bezel is lighter than all the others in the car but I'm not gonna complain. Still better than that awful 9c1 console.
Edit: I think I know what I did. I put the wire in the BCM in the wrong spot, looking at it from the back instead of the front. Should have been 3 over from the other side. (see red wire)
Yeah, that 9c3 shifter bezel is lighter than all the others in the car but I'm not gonna complain. Still better than that awful 9c1 console.
Edit: I think I know what I did. I put the wire in the BCM in the wrong spot, looking at it from the back instead of the front. Should have been 3 over from the other side. (see red wire)
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: Canuck Caprice
Got TUTD working. Put it in spot 19 instead of 20. Couldn't get it out and the wire broke. Had to go to the u-pull yard to get a connector from an Impala. It takes a bit of force using a pin in the front of the connector. You can see the connector without the wire next to the light brown wire I used in the proper position.
Missed it by that much!
Missed it by that much!
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
-
- Posts: 604
- Joined: Mon Sep 11, 2017 5:17 am
- Location: North Jersey
Re: Canuck Caprice
Nice! Glad it was something simple. I have to still install my wiring when I have some free time.
Console looks good, was one of my favorite mods on my car.
Console looks good, was one of my favorite mods on my car.
2012 Caprice
2008 CVPI
Both gone but not forgotten...
2008 CVPI
Both gone but not forgotten...
-
- Posts: 2304
- Joined: Sat Feb 07, 2015 2:31 pm
- Location: Pearland, Texas
Re: Canuck Caprice
That looks nice! I know they make handy tools for removing connectors from their plastic plugs for the old-style spade connectors and Weatherpack. I'd bet there are similar tools for those 'mini-spade' connectors. I haven't looked, but would bet there is one. If you're going to be moving wiring around, that might be a worthwhile addition to your tool box. I wonder if Steve knows of such a tool?Mooseman wrote: ↑Wed Jul 15, 2020 1:42 pm Got TUTD working. Put it in spot 19 instead of 20. Couldn't get it out and the wire broke. Had to go to the u-pull yard to get a connector from an Impala. It takes a bit of force using a pin in the front of the connector. You can see the connector without the wire next to the light brown wire I used in the proper position.
IMG_20200715_104947_resized2541134191387311429.jpg
Missed it by that much!
If they don't, I wonder if something like a photo-etch saw blade with the teeth ground off in an Xacto blade handle would do the job? It would still be fairly stiff, even when cut down to slot into the connector housing.
Gene Beaird,
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
Pearland, Texas
2012 Caprice 9C1
1992 B4C 1LE Camaro
2018 Tahoe PPV (her car)
1995 DGGM Impala SS
1985 Firebird - 310 LS1 C Prepared autocross car.
1980 Bluebird Wanderlodge
And some others
Do YOU have my SPID?
-
- Posts: 7
- Joined: Fri Jul 10, 2020 6:23 am
Re: Canuck Caprice
What year is that console from ?
Re: Canuck Caprice
An 09 since that's the only year that was available in Canada but 08 and 09 are the same. I do know it was from a V6 car but that again is the same as the V8 automatic.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Re: Canuck Caprice
I have a small punch I ground down for just such occasions.CrashTestDummy wrote: ↑Thu Jul 16, 2020 9:00 amThat looks nice! I know they make handy tools for removing connectors from their plastic plugs for the old-style spade connectors and Weatherpack. I'd bet there are similar tools for those 'mini-spade' connectors. I haven't looked, but would bet there is one. If you're going to be moving wiring around, that might be a worthwhile addition to your tool box. I wonder if Steve knows of such a tool?Mooseman wrote: ↑Wed Jul 15, 2020 1:42 pm Got TUTD working. Put it in spot 19 instead of 20. Couldn't get it out and the wire broke. Had to go to the u-pull yard to get a connector from an Impala. It takes a bit of force using a pin in the front of the connector. You can see the connector without the wire next to the light brown wire I used in the proper position.
IMG_20200715_104947_resized2541134191387311429.jpg
Missed it by that much!
If they don't, I wonder if something like a photo-etch saw blade with the teeth ground off in an Xacto blade handle would do the job? It would still be fairly stiff, even when cut down to slot into the connector housing.
Moose man just read through your build. Any plans to continue with the DOD delete and cam upgrade?
Re: Canuck Caprice
Someday. I have DOD turned off through the tune so at least it won't puke on me. Have other projects for now. Still have to install those Brembos.
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419