Big Single TURBO build ...LOADING

Tell us about your new PPV, show us some pictures, let us know how you did what you did!
Forum rules
One thread per car per member in this section. No thread hijacking in this section please, if it's strictly a tech discussion please move it to the appropriate sub-forum - moderators can assist if needed or requested.
Tansman
Posts: 81
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Mon Jul 08, 2019 2:45 pm

I was having trouble with the intercooler piping blowing apart. Even at low boost. I found this cool trick for a makeshift bead roller and it worked great! It was making around 7psi and holding good. It was super rich so I'll up the boost some and see how far I can get!
received_2193949017369780.jpeg
received_2193949017369780.jpeg (225.42 KiB) Viewed 169 times
I used these harbor freight pliers to make my beads.
Attachments
received_460856854695142.jpeg
received_460856854695142.jpeg (196.45 KiB) Viewed 169 times
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)

Dut_The_SS_nuT
Posts: 79
Joined: Tue Jul 11, 2017 4:10 am
Location: Wichita KS

Re: Big Single TURBO build ...LOADING

Post by Dut_The_SS_nuT » Tue Jul 09, 2019 7:49 am

So, I didn’t realize this was you!!!

Pleasure to meet ya the other day! Thanks again for the console! Keep an eye out for the new build! Once I really get started on it I’ll start a thread for it too!
2007 Impala SS, K&N CAI, Flowmasters, Resonator Delete, Diablo Trinity tune
2011 Caprice 9C1 (rest in pieces)
2013 Caprice 9C1, "9C3 console upgrade" Modified Camaro Exhaust, Kayhan VE Series 2 Radio. (Soon to have 4 piston Brembos)
2013 9C1 Bone Stock
1956 Chevy 150 1211B trim code “Business Man Sedan" (currently gutting)

Tansman
Posts: 81
Joined: Wed Dec 21, 2016 12:34 am

Re: Big Single TURBO build ...LOADING

Post by Tansman » Tue Jul 16, 2019 6:10 pm

Dut_The_SS_nuT wrote:
Tue Jul 09, 2019 7:49 am
So, I didn’t realize this was you!!!

Pleasure to meet ya the other day!
Yep! With that being said I got a couple updates!. I traded my g8 center console for a shifter box from Dustin Manning, and he is giving me paddle shifters to go with it! Great deal and I'm super excited about it.

I also got this gauge pod mounted, just screwed it down with some self tappers, I'll probably get some of those black screws later. But I still need to get an oil pressure gauge to fill the empty slot.
20190715_192216.jpg
20190715_192216.jpg (3.01 MiB) Viewed 83 times
So far I've pushed it to a peak of about 7psi But it usually stays around 5 on pulls. I'm getting ready to swap out wastegate springs and up the boost some. It's still super rich so I have a little room .
2012 Chevy Caprice- VSR80 turbo, BTR stage 2, 3.45s, camaro wheels, meth injection (racecar/ weekend car)
2007 Honda Civic SI- Sedan- intake, exhaust, Skunk2 short shifter, shift bushings (wife's daily)
2005 Chevy tahoe- Cold air intake, everything else stock! (The family car)
2000 Honda civic Hatchback- lowered, rota slip wheels. (My daily)

Post Reply