New Caprice - Discussion forums

The worldwide owner-to-owner online support system for the Chevrolet Caprice PPV
It is currently Mon Apr 24, 2017 6:01 pm

All times are UTC [ DST ]


Forum rules


Listings acceptable to post in this section are Caprice PPV's for sale by individuals, government entities (I.E. direct sale/auction/sealed bids), and the occasional car for sale on dealer lots (trade-in's for example) that do not normally sell Caprices. EBAY/Craigslist/auction site ads are OK for the above as well. Please do not post third party ads for cars on behalf of dealers that routinely sell used PPV's as part of their primary business. If you post a car for sale, please add the word "SOLD" in the header after the car sells as a courtesy to other members. Listings by members with under five forum posts may be removed without notice. Please check with a moderator if you have questions.



Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Dec 22, 2016 6:43 pm 
Offline

Joined: Tue Oct 18, 2016 5:47 am
Posts: 8
WSP is getting rid of their 2012's on a weekly basis...I just picked one up last weekend. And overall they are in good shape. I've only seen them in white. This might be a good base car to put in a cam, headers and DOD delete.

http://www.publicsurplus.com/sms/auctio ... uc=1758504
http://www.publicsurplus.com/sms/auctio ... uc=1758455

Average sale price is $7,000

2,000 idle hours, 4,000 total. 100,000 miles
--Ryan
Image
Image


Top
 Profile  
 
PostPosted: Sat Dec 24, 2016 5:37 am 
Offline

Joined: Mon Mar 31, 2014 2:58 am
Posts: 68
Location: Seattle, WA
Were you getting some work done at Everett Chevrolet just the other day? I saw a 2012 9C1 in there, I was getting the oil changed on my 2011.

_________________
Image
1987 Landau (383 stroker, vortec heads, 700r4, Bilstein shocks, Eibach springs, Bassett 15x8, BFGoodrich 275/60, 9C1 speedo)
2011 9C3 (K&N CAI, Weldcraft widened 18x9 factory steelies, Bridgestone 285/35)


Top
 Profile  
 
PostPosted: Sat Dec 24, 2016 7:34 pm 
Offline

Joined: Tue Oct 18, 2016 5:47 am
Posts: 8
Yes that was me. Small world! There were four safety recalls I was getting completed. Headed to Carburetor Connection for cam and long tube headers next month.


Top
 Profile  
 
PostPosted: Thu Jan 19, 2017 12:39 am 
Offline

Joined: Thu Jan 19, 2017 12:32 am
Posts: 5
Location: Seattle Wa. Los Angeles Ca
I just picked one up from wsp today .

_________________
Kris.


Top
 Profile  
 
PostPosted: Sun Jan 22, 2017 2:48 am 
Offline

Joined: Mon Mar 31, 2014 2:58 am
Posts: 68
Location: Seattle, WA
My buddy's dad just picked up a totaled one and will be putting the motor/trani in a 2,000 lb AMC, whoa.

_________________
Image
1987 Landau (383 stroker, vortec heads, 700r4, Bilstein shocks, Eibach springs, Bassett 15x8, BFGoodrich 275/60, 9C1 speedo)
2011 9C3 (K&N CAI, Weldcraft widened 18x9 factory steelies, Bridgestone 285/35)


Top
 Profile  
 
PostPosted: Sun Jan 22, 2017 5:18 pm 
Offline

Joined: Thu Jan 19, 2017 12:32 am
Posts: 5
Location: Seattle Wa. Los Angeles Ca
I'm taking this one to Burien chevrolet to get all the recalls delt with. I noticed I will be needing a driver's side motor mounts. Have you guys had any motor mounts problems?

_________________
Kris.


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 11:05 pm 
Offline

Joined: Tue Oct 18, 2016 5:47 am
Posts: 8
kris98166 wrote:
I'm taking this one to Burien chevrolet to get all the recalls delt with. I noticed I will be needing a driver's side motor mounts. Have you guys had any motor mounts problems?

I had the exact same issue with mine. Front driver side motor mount with the rubber cracked. Otherwise, just a new serpentine belt and air filter....good to go.

What are you doing for a center console?

Ryan


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 11:30 pm 
Offline

Joined: Thu Jan 19, 2017 12:32 am
Posts: 5
Location: Seattle Wa. Los Angeles Ca
The eBay console.

_________________
Kris.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group