Tap Shift for a 9C1 with a G8 Shifter

Need custom module programming for your Caprice PPV? Chris White is here to answer your questions.
Forum rules
Please note & respect that Chris has full-time employment. General questions can be posted here, but for specific individual needs please contact him via his website. SPECIAL NOTE - We have no role or liability in any transactions other then to provide a venue to advertise the items. Disputes must be resolved independently between the parties involved in any transaction.
Post Reply
91C02920
Posts: 142
Joined: Mon Nov 02, 2015 1:19 pm

Tap Shift for a 9C1 with a G8 Shifter

Post by 91C02920 »

Hi, I wanted to know if you can add Tap Shift to a 9C1 using a G8 shifter (or 9C3 shifter same difference as far as I can tell).
My assumption is yes, as you seem to have done it for Kevin Sullivan, but honestly I don't know if that was a one off of some sorts, or just putting in the factory tap shift, and I don't see a tap shift option on the order page.

Also, do you need my BCM or can I send in any BCM I get from the junk yard?
I wanted to ask in case you need to copy the factory setup for my car for some reason.

Thanks
GTPprix
Posts: 287
Joined: Thu Nov 14, 2013 2:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix »

Yes but please contact us from our website.
Chris White
http://www.whiteautoandmedia.com
2022 3LT Red Mist Coupe
2023 70th Anniversary Z06 HTC
2023 Escalade V
2023 Yukon Denali Ultimate LM2
2022 Camaro ZL1 M6
S13REMI
Posts: 123
Joined: Sun Oct 11, 2015 11:59 am

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by S13REMI »

also very interested in this. tried reaching out to you via the website and never heard back.
2012 CAPRICE 460WHP! NIGHT FURY CAM, LONG TUBES, OTR INTAKE, NEW ERA TUNE, COILOVERS, C6 Z06 WHEELS. (BIGGEST EVER ON A CAPRICE)
Image
GTPprix
Posts: 287
Joined: Thu Nov 14, 2013 2:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix »

S13REMI wrote:also very interested in this. tried reaching out to you via the website and never heard back.
When did you contact us? We are only open on the weekends but typically try to reply at night during the week if at all possible.
Chris White
http://www.whiteautoandmedia.com
2022 3LT Red Mist Coupe
2023 70th Anniversary Z06 HTC
2023 Escalade V
2023 Yukon Denali Ultimate LM2
2022 Camaro ZL1 M6
S13REMI
Posts: 123
Joined: Sun Oct 11, 2015 11:59 am

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by S13REMI »

about a month ago. Ill do it again today
2012 CAPRICE 460WHP! NIGHT FURY CAM, LONG TUBES, OTR INTAKE, NEW ERA TUNE, COILOVERS, C6 Z06 WHEELS. (BIGGEST EVER ON A CAPRICE)
Image
GTPprix
Posts: 287
Joined: Thu Nov 14, 2013 2:06 pm
Location: Metro Detroit MI
Contact:

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by GTPprix »

FYI didn't get anything for a PPV (nothing in our spam either).
Chris White
http://www.whiteautoandmedia.com
2022 3LT Red Mist Coupe
2023 70th Anniversary Z06 HTC
2023 Escalade V
2023 Yukon Denali Ultimate LM2
2022 Camaro ZL1 M6
cal30_sniper
Posts: 103
Joined: Thu Aug 04, 2016 1:17 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by cal30_sniper »

Dragging this up, I just inquired on your website about this feature as well. I'm stuck between doing the BCM re-program, or modifying the shifter and using the Holden sport/TC switch like PPV did in his swap. I'd prefer to do it as per the factory and retain the tap shift function of the G8/9C3.
-2011 Caprice 9C3: Mirage Glow Metallic, 63k miles
-2011 Caprice 9C1 (Gone)
-1973 Firebird Formula, restoration in progress
-1986 K30 Suburban 8.1L/NV4500, the toy hauler and wheeler
Maxspeed96ct
Posts: 89
Joined: Fri Jul 21, 2017 6:27 am

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by Maxspeed96ct »

Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?
Big Rich 01
Posts: 15
Joined: Fri Jan 01, 2016 8:36 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by Big Rich 01 »

Maxspeed96ct wrote:Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?

ditto
2013 9C1 6.0 (27,xxx) 14.142 @ 103
2009 Malibu LTZ
1988 2wd Suburban Silverado
1972 Chevelle
1969 Camaro 350/350 X44
91C02920
Posts: 142
Joined: Mon Nov 02, 2015 1:19 pm

Re: Tap Shift for a 9C1 with a G8 Shifter

Post by 91C02920 »

Big Rich 01 wrote:
Maxspeed96ct wrote:Bump to this old thread. I'm in the process of installing a g8 shifter and would like to enable sport and tutd on the g8 shifter.

Aside from having chris program the Bcm. What are the wiring details?

I see from another thread is says pin 1 on the shifter goes to pin 17 on the Bcm . Then pin 4 on the shifter goes to 30 on the BcM.

Is that all there is to it ? What happens to my old gray Sport wire in pin 5 ?

ditto

Maxspeed96ct got his done and posted details on the wires:
http://newcaprice.com/forum/viewtopic.php?f=9&t=2377" onclick="window.open(this.href);return false;

Also check this thread on how to wire it up:
http://newcaprice.com/forum/viewtopic.php?f=21&t=1578" onclick="window.open(this.href);return false;

I did exactly as I posted there.

Both Maxspeed96ct and I didn't need any special programing to get TUTD to work in our cars after it was wired according to factory, so install and wire your shifter up first and test it out. if it doesn't work for some reason, Chris would be the man to talk to .
Post Reply