New Caprice - Discussion forums

RM96 wrote: ↑Fri Oct 08, 2021 10:39 pm I did my own programming on a used SS cluster awhile back and got it setup in my 2016 Caprice. Everything is perfect except one thing. I get a Service Front Camera message when I start the car. Any ideas where to turn this off?

Spent some quality time with my eeprom file. I figured out my Service Front Camera message. For future reference, change 0x1B7 to 00

Nice! I'll add that to the list of known values.

Thanks for the work you are putting into this! Once you have everything mapped out and updated I am going to order the cable and attempt this myself.
Brett

bstoner wrote: ↑Tue Oct 12, 2021 9:40 am Thanks for the work you are putting into this! Once you have everything mapped out and updated I am going to order the cable and attempt this myself.
Brett

I'm sick of all the custom programming guys being so secretive about everything they do. Granted, it is a lot of work, but why not share it with the community and get someone else out there interested in messing with "closed source" systems.

mnp wrote: ↑Fri Oct 08, 2021 10:42 am Thanks guys! I also found the location to add an E85 content meter in the TRIP menu. Going to add that into the guide in the next few days.

Do any of the menus show oil pressure?

Also, have you updated the guide?

tvallaro wrote: ↑Wed Dec 15, 2021 3:44 am

mnp wrote: ↑Fri Oct 08, 2021 10:42 am Thanks guys! I also found the location to add an E85 content meter in the TRIP menu. Going to add that into the guide in the next few days.

Do any of the menus show oil pressure?

Also, have you updated the guide?

I think it is in there, I'd have to double-check, and no I have not updated the menus but here is a spreadsheet I have collected over the last little while for some values.

https://docs.google.com/spreadsheets/d/ ... sp=sharing

Does anyone offer this as a service, for those of us unable to program ourselves?

DirtNapPat wrote: ↑Wed Apr 05, 2023 1:08 pm Does anyone offer this as a service, for those of us unable to program ourselves?

I can do it for you if you are willing to ship me your cluster to Ohio.
Brett

bstoner wrote: ↑Mon Apr 10, 2023 2:45 pm

DirtNapPat wrote: ↑Wed Apr 05, 2023 1:08 pm Does anyone offer this as a service, for those of us unable to program ourselves?

I can do it for you if you are willing to ship me your cluster to Ohio.
Brett

I would be willing to do that...may I ask what the charge is for something like that ?

$20. But honestly it would be way cheaper and easier to do it yourself. Plus the hastle of down time for a week or two while you are without your IPC. You pull the IPC, hook up the chip reader, make two changes to the data, and reinstall it. It took me about an hour to do it all.

Buy the chip reader here: https://www.amazon.com/gp/product/B07R5 ... =UTF8&th=1
Download the software and drivers: https://auto-download.com/download/get/ ... c_rar.html
Remove IPC: https://www.newcaprice.com/forum/viewto ... 588#p14193
Follow the instructions on the PDF: https://drive.google.com/file/d/1oXRN7L ... sp=sharing