xcidmigs wrote:Yes thats the ones i want to use off a 2011 Holden Berlina from Australia.
Part Numbers for the black bezels only are 92231792 and 92231793
Can someone help with the black only bezel part #s? These are showing as chrome.
Btw holdenpartusa.com will try and stock these and other parts like spoilers and fender side markers new direct from holden.
1970 SS454 Monte Carlo - triple black
1971 SS454 Monte Carlo - Red w/ black gut & top
1970 Convertible Mont Carlo - Sold
1968 K10 short wheel base
2009 Silverado 1500
2013 9C1 - PBM - Sold
2013 CTS-V Coupe Silver Frost Matte Eddition
2017 SS - PBM - M6 - Roof - Sold
2019 Silverado 1500 - LTZ 6.2
I don't know why those part #'s are showing up as the chrome to you, I posted them up after getting that order placed by CP who is the one who looked them up, as pictured they are clearly the plain black version. Chrome ones are listed on page 1 here and have different numbers
Guys I could be wrong but the fog lights you are buying from Australia look like the same ones used on 2014 Chevy SS they sell aftermarket ones in USA for like $25 each
roman1978 wrote:Guys I could be wrong but the fog lights you are buying from Australia look like the same ones used on 2014 Chevy SS they sell aftermarket ones in USA for like $25 each
I hope that might help
Roman when we talk about "Fog Lights" we are really only talking about the Bezels or things the light modules mount into. The trick is to get the bezeles (chrome trim or Black out) from AU and use the light modules available through GM in the US (or the aftermarket ones, they look good as well). So it's a sort of mix and match situation.
I see where the blue nuts are needed and 4 bolts go into them, but what are the other 4 bolts for? THe bezels just snap into place yes? Not bolts holding those on correct?
yeah i have no idea, i did mine a month ago and just bought 4 generic bolts and nuts at my local Lowes store.... the front parts do just snap into corresponding slots in the bumper itself and then the lights bolt onto those..... Sorry no clue but I'm still lost on how to activate them using the factory G8 switch and PPV wiring harness so what do i know....
OK tore into this a bit more this week. Was able to transfer the terminals from the Australian fog light harness to some empty spots on the Side marker Light Harness. This will ensure only one connector for all front bumper items. Need some corresponding terminals for the car side connector. The connector is a Yazaki Product. Details in the pic below:
Think I need terminal 7114-4026 along with a rubber sealing ring and that appears to be part number 7158-3006-90