Camaro console finished….kinda
-
- Posts: 65
- Joined: Tue Oct 19, 2021 5:54 pm
Camaro console finished….kinda
Just got the shifter cubby form ipf racing installed it finishes it off good still on the fence with the silver bezel might paint it textured black
- Attachments
-
- DC14A1E9-8069-424A-A099-69B8FDD68F4D.jpeg (3.01 MiB) Viewed 1771 times
-
- F76A1504-1674-4D3E-934B-34B41765CB53.jpeg (3.33 MiB) Viewed 1771 times
-
- D0DF6C46-CD8B-4B44-BD98-61D8BFEDB64A.jpeg (3.63 MiB) Viewed 1771 times
-
- F828E341-F568-4C2B-9F04-D38E62868BE9.jpeg (2.7 MiB) Viewed 1771 times
Re: Camaro console finished….kinda
That looks PDG (Pretty Damned Good).
2011 Caprice PPV, former RCMP test vehicle, never put into service
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
Build Thread: http://www.newcaprice.com/forum/viewtopic.php?t=2419
- elc32955
- System Manager
- Posts: 2739
- Joined: Thu Nov 29, 2012 10:32 am
- Location: East Central Florida
- Contact:
Re: Camaro console finished….kinda
Not bad at all. Only difference between mine and yours is that I set my console back slightly from the police dash cap, I did that to provide for a space for cords to hide into since a lot of times electronics has longer power cords that tend to go everywhere with the slack.
Looks nice!
Thanks
Eric
Looks nice!
Thanks
Eric
System Manager and your tour guide for the day. 2015 Caprice w/LFX, former NC DPS staff car. Partial hybrid G8/SS/Camaro SS interior mods, SS MyLink radio upgrade, 2016 Camaro V6 rims, GMPP Malibu chrome exhaust tips, otherwise bone stock for now.
Re: Camaro console finished….kinda
I presume you guys are using a 5th gen console? Any issues with the install? Does it bolt in? Thanks.
2014 Caprice PPV, 6.0L, BTR Stage 2 Cam, 3.45, 3" exhaust, Rotofab intake, Chris Henry tuned, future LSA....
-
- Posts: 65
- Joined: Tue Oct 19, 2021 5:54 pm
Re: Camaro console finished….kinda
There’s definitely cutting and drilling involved but it’s really not that difficult to make work It literally took me 30 minutes to get it ruffed in
-
- Posts: 134
- Joined: Mon May 17, 2021 10:13 am
Re: Camaro console finished….kinda
I'm curious about how you mounted it, looks a lot taller than mine but I took out the parking brake. I love the shifter cubby, I'll have to send IPF a message on Instagram about getting one of those.
-
- Posts: 134
- Joined: Mon May 17, 2021 10:13 am
Re: Camaro console finished….kinda
https://ipfracing.com/products/camaro-console-swap
Good looking kit, seems to have everything needed to install one of these consoles if anyone is looking to do this
Good looking kit, seems to have everything needed to install one of these consoles if anyone is looking to do this