I am struggling to remove the passenger airbag and glovebox. I got the 10mm bolts and screws out of the bottom of the knee/bolster airbag. I can't seem to figure out the rest. The drivers side knee/bolster airbag was easy.
This is turning into quite the pain.
Thanks
Mike
Help, trying remove passenger airbag and glovebox
Re: Help, trying remove passenger airbag and glovebox
https://www.newcaprice.com/forum/viewto ... 7&start=60
Look down to the illustrations in the post by smwalker, really helped me out the other week.
Oh and the rubber bottom part of the glove box just pulls out, revealing some screws.
Look down to the illustrations in the post by smwalker, really helped me out the other week.
Oh and the rubber bottom part of the glove box just pulls out, revealing some screws.
2014 Caprice PPV 6.0L - TSP Stage 1 Cam, Solo 3in Mach Cat Back, VCM OTR, Pedders Coilovers, HP Tuned
2002 Avalanche 5.3L - MBRP Exhaust, RC 6in Lift
2002 Avalanche 5.3L - MBRP Exhaust, RC 6in Lift
-
- Posts: 47
- Joined: Fri Sep 18, 2020 6:41 pm
- Location: Georgetown, TX
Re: Help, trying remove passenger airbag and glovebox
On an ‘11-‘13 there are 3 screws along the front under the rubber pad on the bottom of the glove box, 3 screws behind the silver trim piece on the dash just about the glove box, and 2 behind the little pop out covers on the left and right sides.
2015 Caprice 6.0
Re: Help, trying remove passenger airbag and glovebox
Thanks guys, can't believe I did not catch that. Got it out.
Thanks
Mike
Thanks
Mike