Interior rear door panel interchange

[Chevyfanatic32]

So, HOW do I get a set of 14+ Aussie Rear Door Panels????

Because they are larger than the limits on the Postal rules they gotta go by a private carrier and that can get expensive and not many of the wreckers in AU are willing to ship to USA. There are a few guys who are bringing over larger shipments of items. They are mostly active on FB. Every few months they post like 4 sets for sale of varying quality. They are floating around out there. Gotta be quick!

Would you happen to have a part number? I've searched everywhere to see which Holden door panels are compatible with my 2016 Caprice but haven't had much luck.

[smwalker]

These would be the middle east (ME) panels. Seems they were all the titanium. They usually line up with the AUS part numbers but the AUS have a few more options of colors than the ME does. But I have never been able to find the AUS Holden catalog online anywhere.

WN rear door panels.png (135.28 KiB) Viewed 821 times

From:
https://partsouq.com/en/catalog/genuine ... 7834482&q=

[Chevyfanatic32]

These would be the middle east (ME) panels. Seems they were all the titanium. They usually line up with the AUS part numbers but the AUS have a few more options of colors than the ME does. But I have never been able to find the AUS Holden catalog online anywhere.

WN rear door panels.png

From:
https://partsouq.com/en/catalog/genuine ... 7834482&q=

Thanks for the quick response this is helpful! I found #92292993 and hoping it was a good fit but I didn't see it listed above

[smwalker]

92292993 - that appears to be for a VF - so that would be an SS. Wont work too short
Remember
VE - VF = G8/SS
WM - WN = 11-13 PPV / 14+ PPV

[Chevyfanatic32]

92292993 - that appears to be for a VF - so that would be an SS. Wont work too short
Remember
VE - VF = G8/SS
WM - WN = 11-13 PPV / 14+ PPV

Thanks for clarifying