Page 4 of 5

Re: It all started with wanting cup holders; 2015 Chevy SS D

Posted: Sat Mar 17, 2018 4:25 pm
by chrismcd11
Victor, you detailed the dash install very well.
Any details and photos on installing the console and shifter?
What does the new console mount to?
Could you post a photo and circle what pulley needs to be cut?

Thanks!

Re: It all started with wanting cup holders; 2015 Chevy SS D

Posted: Sat Mar 31, 2018 10:06 pm
by Silversled
After several requests for more info on the floor (center) console and what I did to make it fit, here are some more pictures.

The Parking Brake bracket doubles as an adjustment feature for the cable coming from the foot brake. It also serves as a mounting provision for the steel rack that sits above it. It needs to be trimmed to its smallest possible size yet still retain the parking brake function. Here is what mine looks like after I trimmed it.

Image

Also shown in the picture above are the left hand side steel tabs that come off the trans tunnel. These tabs are common to the Chevy SS and is where the floor console bolts to. There are a total of four mount tabs that correspond to the floor console.

On the console itself, the attachment holes that you bolt through are common to the plastic duct in the console. Unfortunately I sacrificed the ducting function and cut away the duct to make room for the brake mechanism. The idea is to cut enough away to clear the brake bracket when you place the console over it. There are two options. The first is retaining the four mounts which requires cutting away parts of the duct to clear the brake bracket while leaving the forward attachment lugs. The second and cleaner way is to cut out the entire forward sections of the duct and loose the forward two attachment points. This isn't a big deal since the front of the console is clipped and bolted to the dash panel. Here are the two options.

Image

Image

Re: It all started with wanting cup holders; 2015 Chevy SS D

Posted: Sun Apr 01, 2018 5:13 am
by s/c'd cav
im sure need some of this

thank you

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Fri Mar 29, 2019 5:53 pm
by dhiser1243
How much of the duct did you have to clear out of the floor duct for the center console in order to mount it to the floor? I am working on putting in the ss dash and center console in my 2014 Caprice and I am having issues getting the center console to sink far enough down.

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Fri Oct 18, 2019 7:38 pm
by ras9170
I know you posted that you didn't do the hud unit install, my question has to do with, are the wires there in the harness already, is it a separate harness and if possible do you know where it attaches to. I really want to use all the available items, as I purchased a brake actuator as well as the hud. I plan on making all the seats function and the memory as well. some items I may not try and use the bcm to make them work.

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Mon Aug 17, 2020 8:37 pm
by LxrdofWolves
Just want to thank you guys for this post. I just installed my center console without any issues whatsoever.. Anyone got a link to the SS dashboard install if it isn’t straight forward? I’m waiting for mine to be delivered.. and I’d love to go right at it. I tend to prep ahead lol

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Mon Aug 17, 2020 9:04 pm
by smwalker
Not sure anyone has detailed the removal of the dash cover because it is so involved. Basically you are going to remove about 50 7mm bolts that are hiding all over. remove airbags, all side panels everything you can remove then there are 4 pins on the sides of the dash that lock it on. Bend it around those and it slips off.

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Tue Aug 18, 2020 4:42 pm
by chrismcd11
Thanks for the inspiration! Mine was completed last week.

Image

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Sun Nov 01, 2020 4:41 pm
by jrob56
So my center console is in, went parking brake delete route. I’m going full dash swap now and should have one on the way his week. Long term I want to do floor shifter but like to do dash now and retain the column shifter for awhile. Does dash need to be out to get column shifter out?

Re: It all started with wanting cup holders; 2015 Chevy SS Dash

Posted: Sat Jan 30, 2021 1:52 pm
by TTriglia417
So I just purchased the SS dash, door panels, gauge cluster, & auto shifter.. currently looking for a center console. I installed the door panels and the front windows no longer roll down. Do you know if I have to switch over the harness from the caprice or can I just repin the connection, if so do you know which wires would need RE-pinning? Any help would be greatly appreciated!

** I figured it out, I had to swap over the door harness's along with the driver and passenger window switches.. *** All is working properly now