Welds are on the car!

[CrashTestDummy]

And you'll need the weight transfer to get those MTs to bite!!

[leadfart]

True, I may end having to go to Hoosier 28x10 slicks, won't be the first time I went with the wrong set up!

[CrashTestDummy]

Heh, that'll let you find the next weak link in the chain faster.

[leadfart]

I already know all the weak links, I'll address them one by one, when I break them!

[lsxJERRY]

Looks mean! I was under the impression that 17's wouldn't fit our cars, guess they can, or probably rear only right?

[leadfart]

Weld makes 17's that will work in front, as well. Just takes the green stuff!

[eagle-co94]

I just fit a different 17" wheel to the front. The only issue I had was the shape of the spokes. A 5mm spacer and the issue is resolved. It comes down to the shape of the wheel.

[leadfart]

I know that Welds will clear the front, because several of my Chevy SS buddies run them. I'm just not going to run Welds all around, only for my slicks now.

[leadfart]

Weld makes a 17 and 18, in the same style wheel I'm running. Either one would fit, I just like my Caprice-V wheels for the street.