Wheel ID help?

Discussion on wheel & tire issues
Post Reply
Yuckydog
Posts: 51
Joined: Wed Jul 10, 2019 11:51 pm
Location: Holly Springs, GA

Wheel ID help?

Post by Yuckydog » Fri Jun 19, 2020 9:04 am

Hi, does anybody recognize these wheels?
1858987431.jpg
1858987431.jpg (61.57 KiB) Viewed 5807 times

smwalker
Posts: 2042
Joined: Mon Jul 29, 2013 6:44 am
Location: Azusa,CA

Re: Wheel ID help?

Post by smwalker » Fri Jun 19, 2020 9:50 am

looks to be these but the edge may have been machined a bit more and not painted:

https://www.shopchevyparts.com/wheels/2 ... 04438.html
Steve Walker
Azusa, CA
'11 PPV 9C3 Huron White

lastcall190
Posts: 591
Joined: Mon Sep 11, 2017 10:17 am
Location: North Jersey

Re: Wheel ID help?

Post by lastcall190 » Fri Jun 19, 2020 11:22 am

Look like the ones from the hot wheels edition camaro

Image
2012 Caprice
2008 CVPI

Both gone but not forgotten...

Yuckydog
Posts: 51
Joined: Wed Jul 10, 2019 11:51 pm
Location: Holly Springs, GA

Re: Wheel ID help?

Post by Yuckydog » Fri Jun 19, 2020 4:44 pm

I thought it was the Hot Wheels wheel too but just tiny bit different.

It does look just like the 2020 wheels with the surface machined off, I really like it.

lastcall190
Posts: 591
Joined: Mon Sep 11, 2017 10:17 am
Location: North Jersey

Re: Wheel ID help?

Post by lastcall190 » Fri Jun 19, 2020 4:52 pm

You're right. Now that I'm not looking at this on my phone, it's pretty obvious

-J
2012 Caprice
2008 CVPI

Both gone but not forgotten...

BigBen 6.0
Posts: 7
Joined: Tue Jun 09, 2020 1:01 pm

Re: Wheel ID help?

Post by BigBen 6.0 » Thu Jun 25, 2020 1:03 pm


Yuckydog
Posts: 51
Joined: Wed Jul 10, 2019 11:51 pm
Location: Holly Springs, GA

Re: Wheel ID help?

Post by Yuckydog » Fri Nov 20, 2020 9:10 am

Sorry to dredge up this old thread but I have a chance to buy a set of these wheels but I think it's a set of four rears.

Bolt Pattern 5-120
Offset 39mm
Wheel Size 20x9.5
Hub Bore 67.1
Style 5 SPLIT SPOKE

Will this offset and width cause any issues when these wheels are used on all four corners? Will they stick out too far and rub against the fenders?

Thanks in advance!

Post Reply