My ordered GM 09593297 (9C1 Impala) Hub Caps arrived.
As per Maurice's photos, they bolt up perfectly.
There is a minor difference in the PCD, however all promo photos from the PPV 2011 seem to also depict the PCD being a bit off.
Lug nuts should clear the Hub Caps, but worst case scenario I can drill out the lug holes in the Hub Caps to clear.
Here are a few pictures to give you an idea. Makes the PPV steel wheels look more NASCAR/Days of Thunder than the standard PPV ones. Matter of taste I suppose.
GM Part Number for the Caprice PPV 2011 Hub Caps (9C1 Impala Style)
-
- Administration Staff
- Posts: 1724
- Joined: Tue Mar 19, 2013 6:30 pm
- Location: Canton GA
Re: GM Part Number for the Caprice PPV 2011 Hub Caps (9C1 Impala Style)
The PCD difference is 120mm vs 115mm - 2.5mm radially, about 1/10 of an inch (0.1")
The one thing you don't want is for the center caps to have an "orbit" - hopefully they mount up and are concentric to the wheel, and the lugs can be torqued without distorting the cap in any way.
The one thing you don't want is for the center caps to have an "orbit" - hopefully they mount up and are concentric to the wheel, and the lugs can be torqued without distorting the cap in any way.
Bill Harper
inov8r@windstream.net
inov8r@windstream.net