Looking at some Drag DR-37 wheels

Discussion on wheel & tire issues
Post Reply
K9Vic
Posts: 241
Joined: Fri Oct 04, 2013 9:36 pm
Location: Fort Worth
Contact:

Looking at some Drag DR-37 wheels

Post by K9Vic »

I like my stock steel wheels, but I think I want to change them out to get away from that full on cop car look. I was watching the Holden HSV build video and liked those black wheel and I found that the Drag DR-37 are very close in style and look. They are not too expensive at $150 each and I can get them at Discount Tire who I trust and use for tires.

Do you think these are good wheels for quality?
Will they work OK with a 40mm offset?

These are he specs, what size should would work best: 18X8 or 18X8.5
Bolt: 5-120
Offset: 40mm

This is the Drag DR-37 wheel.
Image

Screen shot from the Holden video, did not see any good pictures on the net.
Image

Would look like this as seen on the G8
Image

Here is my Caprice, it will soon have the Holden emblems.
Image
User avatar
l77
Posts: 155
Joined: Sat Oct 19, 2013 10:11 am

Re: Looking at some Drag DR-37 wheels

Post by l77 »

Both width should fit. Do a google image search with (drag dr 37 site:g8board.com) you will find plenty of images. You need to get rid of the spotlight first to 'to get away from that full on cop car look' though:)
x-pro1/x-pro2/x-t30
8/12/18/35/60/90mm
56nomad
Posts: 26
Joined: Tue Oct 15, 2013 12:09 pm

Re: Looking at some Drag DR-37 wheels

Post by 56nomad »

I'm going down the same road myself. The stock offset is 46mm if I recall correctly. Most of the aftermarket wheels have offsets between 35mm and 45mm. Any of those should be fine with 8 or 8.5 widths. I like that style wheel also; most of the aftermarket companies have a similar wheel (I know TSW and Enkei do). Does the DR-37 have a good reputation amongst the G8 crowd?
Post Reply